Introduzione

This will show you how to open up the camera and replace the camera flash.

Parti

Nessuna parte richiesta.

Turn the front of the camera toward you.
  • Turn the front of the camera toward you.

Aggiungi Commento

On the left side of the camera, use a Phillips #00 Precision Screwdriver to remove the two screws. On the left side of the camera, use a Phillips #00 Precision Screwdriver to remove the two screws. On the left side of the camera, use a Phillips #00 Precision Screwdriver to remove the two screws.
  • On the left side of the camera, use a Phillips #00 Precision Screwdriver to remove the two screws.

Aggiungi Commento

On the right side of the camera, remove the first visible screw.
  • On the right side of the camera, remove the first visible screw.

Aggiungi Commento

Lift the HDMI and A/V OUT cover to access the hidden screw and remove.
  • Lift the HDMI and A/V OUT cover to access the hidden screw and remove.

Aggiungi Commento

Flip the camera upside down and remove the seven marked screws.
  • Flip the camera upside down and remove the seven marked screws.

Aggiungi Commento

Remove the two screws hidden underneath the display panel. Remove the two screws hidden underneath the display panel.
  • Remove the two screws hidden underneath the display panel.

Aggiungi Commento

Use a plastic opening tool to gently loosen up the sides of the camera. Use a plastic opening tool to gently loosen up the sides of the camera. Use a plastic opening tool to gently loosen up the sides of the camera.
  • Use a plastic opening tool to gently loosen up the sides of the camera.

Aggiungi Commento

Carefully open the camera. There are two ribbon cables when opening the camera. Make sure to properly detach them before proceeding. Disassembling Nikon Coolpix P100 Ribbon Cable

Aggiungi Commento

Now you have partial access to the camera's motherboard.
  • Now you have partial access to the camera's motherboard.

  • Remove the five indicated screws that are attached to the metal plate.

Aggiungi Commento

Remove the hidden top screw that is attached to the metal plate.
  • Remove the hidden top screw that is attached to the metal plate.

Aggiungi Commento

Use a plastic opening tool to carefully loosen the metal plate. Remove the panel to access the camera's motherboard. Remove the panel to access the camera's motherboard.
  • Use a plastic opening tool to carefully loosen the metal plate.

  • Remove the panel to access the camera's motherboard.

Aggiungi Commento

Now you have access to the camera's motherboard
  • Now you have access to the camera's motherboard

Aggiungi Commento

Remove the screw that is located on the left of the view finder.
  • Remove the screw that is located on the left of the view finder.

Aggiungi Commento

Carefully detach the two ribbon cables and detach the viewfinder.
  • Carefully detach the two ribbon cables and detach the viewfinder.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Nghiem Ngo

Membro da: 15/01/2015

243 Reputazione

2 Guide realizzate

Team

USF Tampa, Team 1-1, Tanski Winter 2015 Membro di USF Tampa, Team 1-1, Tanski Winter 2015

USFT-TANSKI-W15S1G1

3 Membri

4 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 8

Tutti i Tempi: 397