Introduzione

This guide is to be used to install buttons in the case that the buttons are damage or are no longer functioning properly due to overuse. A Phillips screwdriver will be needed to complete this installation.

Parti

Nessuna parte richiesta.

Remove wrist strap by unknotting the strap.
  • Remove wrist strap by unknotting the strap.

Aggiungi Commento

Open SD/Battery cover.
  • Open SD/Battery cover.

Aggiungi Commento

Remove the four screws on the bottom of the camera using the Phillips-Head screwdriver. Remove the four screws on the bottom of the camera using the Phillips-Head screwdriver.
  • Remove the four screws on the bottom of the camera using the Phillips-Head screwdriver.

Aggiungi Commento

Pull the silver side panels on each side. Pull the silver side panels on each side.
  • Pull the silver side panels on each side.

Aggiungi Commento

On the right side of the camera (that contains the wrist strap loop), use the  screwdriver to remove the two screws holding the backplate in place. Repeat this step for the left side.
  • On the right side of the camera (that contains the wrist strap loop), use the screwdriver to remove the two screws holding the backplate in place.

    • Repeat this step for the left side.

Aggiungi Commento

Pull the back silver faceplate to separate it from the rest of the camera. Pull the back silver faceplate to separate it from the rest of the camera.
  • Pull the back silver faceplate to separate it from the rest of the camera.

Aggiungi Commento

Using fingers, lift up button plate on the side closest to the LCD screen.
  • Using fingers, lift up button plate on the side closest to the LCD screen.

Aggiungi Commento

Pull on ribbon cables to disconnect ribbon cables.
  • Pull on ribbon cables to disconnect ribbon cables.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 3 persone hanno completato questa guida.

Patty Richeson

Membro da: 11/03/2013

75 Reputazione

4 Guide realizzate

Team

Clemson, Team 12-5, Benson Spring 2013 Membro di Clemson, Team 12-5, Benson Spring 2013

CLEM-BENSON-S13S12G5

4 Membri

7 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 3

Tutti i Tempi: 246