Introduzione

installing the battery housing

Using two fingers, push up on the rear cover. Using two fingers, push up on the rear cover.
  • Using two fingers, push up on the rear cover.

Aggiungi Commento

The rear cover slides up and off.
  • The rear cover slides up and off.

Aggiungi Commento

Using the plastic opening tools, pry the left bottom corner of the battery up.
  • Using the plastic opening tools, pry the left bottom corner of the battery up.

Aggiungi Commento

Pull the battery up and out.
  • Pull the battery up and out.

Aggiungi Commento

Remove the two Torx T5 screws.
  • Remove the two Torx T5 screws.

  • Remove the one Philips #00 screw.

#0 Phillis screw

skuhry - Replica

Using the plastic opening tool, pry up the battery housing upwards. Push pry tool down, undoing the plastic tab.
  • Using the plastic opening tool, pry up the battery housing upwards.

  • Push pry tool down, undoing the plastic tab.

Aggiungi Commento

Pry the upper left tab open on the battery housing. Pry the upper left tab open on the battery housing.
  • Pry the upper left tab open on the battery housing.

Aggiungi Commento

Pry the top tab of the battery housing. Pry the top tab of the battery housing.
  • Pry the top tab of the battery housing.

Aggiungi Commento

Pry the right side tab of the battery housing. Pry the right side tab of the battery housing.
  • Pry the right side tab of the battery housing.

Aggiungi Commento

Pull up on the battery housing. Slide the battery housing out to remove it.
  • Pull up on the battery housing.

  • Slide the battery housing out to remove it.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Niklas Johnson

Membro da: 31/01/2012

1.063 Reputazione

18 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 1,462