Introduzione

Removing the speaker requires the removal of the motherboard, which requires nearly a full dis-assembly of the phone.

Parti

Nessuna parte richiesta.

Place thumb on the rubber tab on the lower back of the phone.
  • Place thumb on the rubber tab on the lower back of the phone.

  • Push away from the phone to release back panel.

Aggiungi Commento

Lift the back panel of the phone to expose battery (not shown here).
  • Lift the back panel of the phone to expose battery (not shown here).

Aggiungi Commento

Pull antenna up, away from the phone, to reveal two of six screws.
  • Pull antenna up, away from the phone, to reveal two of six screws.

Aggiungi Commento

Unscrew all six 5.4 mm screws on the back side of the phone using the T-6 screwdriver bit.
  • Unscrew all six 5.4 mm screws on the back side of the phone using the T-6 screwdriver bit.

Aggiungi Commento

Kit RAM Mac
Accelera il Mac. Porta la memoria al massimo.
Kit RAM Mac
Metti più memoria nel tuo Mac.
Gently separate the front and back sides of the phone. Be careful not to break or bend the ribbon cables.
  • Gently separate the front and back sides of the phone.

  • Be careful not to break or bend the ribbon cables.

Aggiungi Commento

Detach the first ribbon cable by unplugging it from the logic board. Detach the first ribbon cable by unplugging it from the logic board.
  • Detach the first ribbon cable by unplugging it from the logic board.

Aggiungi Commento

Gently remove the side button by pulling the buttons away from the phone. Gently remove the side button by pulling the buttons away from the phone. Gently remove the side button by pulling the buttons away from the phone.
  • Gently remove the side button by pulling the buttons away from the phone.

Aggiungi Commento

Grab the tab at the bottom of the metal plate, and pull to remove the plate from the phone. Grab the tab at the bottom of the metal plate, and pull to remove the plate from the phone. Grab the tab at the bottom of the metal plate, and pull to remove the plate from the phone.
  • Grab the tab at the bottom of the metal plate, and pull to remove the plate from the phone.

Aggiungi Commento

Slightly bend the phone frame to expose microphone protrusion. Gently remove microphone using your fingers. Gently remove microphone using your fingers.
  • Slightly bend the phone frame to expose microphone protrusion.

  • Gently remove microphone using your fingers.

Aggiungi Commento

Once the microphone has been removed, remove the connecting piece
  • Once the microphone has been removed, remove the connecting piece

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Haley S

Membro da: 11/03/2013

1 Reputazione

4 Guide realizzate

Team

Clemson, Team 13-6, Benson Spring 2013 Membro di Clemson, Team 13-6, Benson Spring 2013

CLEM-BENSON-S13S13G6

3 Membri

10 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 102