Introduzione

The metal support plate must be removed in order to get to the phone speaker for removal.

Parti

Nessuna parte richiesta.

Place thumb on the rubber tab on the lower back of the phone.
  • Place thumb on the rubber tab on the lower back of the phone.

  • Push away from the phone to release back panel.

Aggiungi Commento

Lift the back panel of the phone to expose battery (not shown here).
  • Lift the back panel of the phone to expose battery (not shown here).

Aggiungi Commento

Pull antenna up, away from the phone, to reveal two of six screws.
  • Pull antenna up, away from the phone, to reveal two of six screws.

Aggiungi Commento

Kit RAM Mac
Accelera il Mac. Porta la memoria al massimo.
Kit RAM Mac
Metti più memoria nel tuo Mac.
Unscrew all six 5.4 mm screws on the back side of the phone using the T-6 screwdriver bit.
  • Unscrew all six 5.4 mm screws on the back side of the phone using the T-6 screwdriver bit.

Aggiungi Commento

Gently separate the front and back sides of the phone. Be careful not to break or bend the ribbon cables.
  • Gently separate the front and back sides of the phone.

  • Be careful not to break or bend the ribbon cables.

Aggiungi Commento

Detach the first ribbon cable by unplugging it from the logic board. Detach the first ribbon cable by unplugging it from the logic board.
  • Detach the first ribbon cable by unplugging it from the logic board.

Aggiungi Commento

Gently remove the side button by pulling the buttons away from the phone. Gently remove the side button by pulling the buttons away from the phone. Gently remove the side button by pulling the buttons away from the phone.
  • Gently remove the side button by pulling the buttons away from the phone.

Aggiungi Commento

Grab the tab at the bottom of the metal plate, and pull to remove the plate from the phone. Grab the tab at the bottom of the metal plate, and pull to remove the plate from the phone. Grab the tab at the bottom of the metal plate, and pull to remove the plate from the phone.
  • Grab the tab at the bottom of the metal plate, and pull to remove the plate from the phone.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Haley S

Membro da: 11/03/2013

1 Reputazione

4 Guide realizzate

Team

Clemson, Team 13-6, Benson Spring 2013 Membro di Clemson, Team 13-6, Benson Spring 2013

CLEM-BENSON-S13S13G6

3 Membri

10 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 88