Parti

Nessuna parte richiesta.

Turn off the phone.
  • Turn off the phone.

  • Turn the device over.

  • Remove the battery cover.

Aggiungi Commento

  • Insert thumb in the gap between the button and the battery and pry the battery upwards.

  • Pull the battery out of the phone.

Aggiungi Commento

Insert the new battery.
  • Insert the new battery.

Aggiungi Commento

Four 5 mm screws are visible (circled in red).
  • Four 5 mm screws are visible (circled in red).

  • Using the T6 tool, remove all four 5mm screws and set them aside.

Aggiungi Commento

Insert the plastic opening tool between the front and back panels of the lower half of the device. Slide the tool around the entire frame of the device until it has loosened. Remove the back of the device.
  • Insert the plastic opening tool between the front and back panels of the lower half of the device.

  • Slide the tool around the entire frame of the device until it has loosened.

  • Remove the back of the device.

Aggiungi Commento

Use the pry bar to carefully remove the headphone jack. Use the pry bar to carefully remove the headphone jack.
  • Use the pry bar to carefully remove the headphone jack.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Information on recycling/disposing of your electronic waste is located under Additional Information on the device page.

Jacob Gray

Membro da: 26/03/2014

401 Reputazione

8 Guide realizzate

Team

Clemson, Team 6-3, Benson Spring 2014 Membro di Clemson, Team 6-3, Benson Spring 2014

CLEM-BENSON-S14S6G3

3 Membri

18 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 69