Aggiusta la tua roba Comunità Store

Motorola V60s Button Key Board Replacement

Introduzione

This guide describes how to replace the button key board, or the processor that interprets key pad information.

Cosa ti serve

  1. Motorola V60s Button Key Board Replacement, Battery: passo 1, immagine 1 di 3 Motorola V60s Button Key Board Replacement, Battery: passo 1, immagine 2 di 3 Motorola V60s Button Key Board Replacement, Battery: passo 1, immagine 3 di 3

    • Push in release lever towards top of phone, then use blue spudger to pry case off.

    • After case is removed from the back of the phone, you can simply use your hands to take it the rest of the way off.

    • Set cover aside in a safe location.

    Traduci

  2. Motorola V60s Button Key Board Replacement: passo 2, immagine 1 di 2 Motorola V60s Button Key Board Replacement: passo 2, immagine 2 di 2

    • Carefully grab battery towards bottom of phone.

    • Lift from bottom and take out of phone, set aside in a safe location.

    Traduci

  3. Motorola V60s Button Key Board Replacement, Logic Board: passo 3, immagine 1 di 2 Motorola V60s Button Key Board Replacement, Logic Board: passo 3, immagine 2 di 2

    • Unscrew four corner screws with T6 screwdriver.

    • Note: The two top screws are short and silver. The two bottom screws are black and long.

    Traduci

  5. Motorola V60s Button Key Board Replacement: passo 4, immagine 1 di 3 Motorola V60s Button Key Board Replacement: passo 4, immagine 2 di 3 Motorola V60s Button Key Board Replacement: passo 4, immagine 3 di 3

    • Use a spudger to gently pry off back chassis. Wedge the spudger in crevice between back panel and phone and lift.

    Traduci

  6. Motorola V60s Button Key Board Replacement: passo 5, immagine 1 di 3 Motorola V60s Button Key Board Replacement: passo 5, immagine 2 di 3 Motorola V60s Button Key Board Replacement: passo 5, immagine 3 di 3

    • Starting from left side of phone, remove side buttons and place aside.

    • Note: There should be three buttons. One on each side, and the top.

    • Return phone to starting orientation when done.

    Traduci

  7. Motorola V60s Button Key Board Replacement: passo 6, immagine 1 di 3 Motorola V60s Button Key Board Replacement: passo 6, immagine 2 di 3 Motorola V60s Button Key Board Replacement: passo 6, immagine 3 di 3

    • Gently remove orange ribbon cable by prying up with spudger.

    Traduci

  8. Motorola V60s Button Key Board Replacement: passo 7, immagine 1 di 2 Motorola V60s Button Key Board Replacement: passo 7, immagine 2 di 2

    • Use a spudger to pry up logic board by wedging in between logic board and chassis and lifting.

    • Note: Orange ribbon cable is fragile and can be broken.

    Traduci

  9. Motorola V60s Button Key Board Replacement, Button Key Board: passo 8, immagine 1 di 2 Motorola V60s Button Key Board Replacement, Button Key Board: passo 8, immagine 2 di 2

    • Insert spudger under button board and gently lift, set aside.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 5 altri collaboratori

Eric Freeman

Membro da: 01/26/10

10 Reputazione

7 Guide realizzate

Distintivi: 9

+6 altri distintivi

Team

Cal Poly, Team 8-48, Regan Winter 2010 Membro di Cal Poly, Team 8-48, Regan Winter 2010

CPSU-REGAN-W10S8G48

4 Membri

13 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 1

Tutti i Tempi: 1,323