Salta al contenuto principale

Motorola V557 Rear Casing Replacement

Cosa ti serve

  1. Motorola V557 Rear Casing Replacement, Battery: passo 1, immagine 1 di 3 Motorola V557 Rear Casing Replacement, Battery: passo 1, immagine 2 di 3 Motorola V557 Rear Casing Replacement, Battery: passo 1, immagine 3 di 3
    • First, on the back of the phone find the silver button on the top left corner of the phone.

    • Simultaneously push down the button and slide the back plate down to reveal the battery.

  2. Motorola V557 Rear Casing Replacement: passo 2, immagine 1 di 2 Motorola V557 Rear Casing Replacement: passo 2, immagine 2 di 2
    • Grab the lower edge of the battery at the two bottom corners.

    • Pull upward on the edges to remove the battery.

  3. Motorola V557 Rear Casing Replacement, SIM Card: passo 3, immagine 1 di 3 Motorola V557 Rear Casing Replacement, SIM Card: passo 3, immagine 2 di 3 Motorola V557 Rear Casing Replacement, SIM Card: passo 3, immagine 3 di 3
    • Push the metal slider towards the top of the phone until it clicks out of the original position.

    • Gently slide out and remove the SIM card.

  4. Motorola V557 Rear Casing Replacement, Antenna: passo 4, immagine 1 di 2 Motorola V557 Rear Casing Replacement, Antenna: passo 4, immagine 2 di 2
    • Grip the antenna and twist it counterclockwise to loosen it.

    • When it has been loosened all the way, pull gently to remove the antenna piece.

  5. Motorola V557 Rear Casing Replacement, Rear Casing: passo 5, immagine 1 di 3 Motorola V557 Rear Casing Replacement, Rear Casing: passo 5, immagine 2 di 3 Motorola V557 Rear Casing Replacement, Rear Casing: passo 5, immagine 3 di 3
    • Using the push pin, gently pry the top two screws of the cover off.

    • The cover in the upper left of the back plate does not need to be removed.

  6. Motorola V557 Rear Casing Replacement: passo 6, immagine 1 di 3 Motorola V557 Rear Casing Replacement: passo 6, immagine 2 di 3 Motorola V557 Rear Casing Replacement: passo 6, immagine 3 di 3
    • At the corners of the phone, remove all four 6.0 mm Torx screws, using your screwdriver.

  7. Motorola V557 Rear Casing Replacement: passo 7, immagine 1 di 3 Motorola V557 Rear Casing Replacement: passo 7, immagine 2 di 3 Motorola V557 Rear Casing Replacement: passo 7, immagine 3 di 3
    • Next, insert a spudger into the marked holes. One at a time pry away from the phone to release the internal tabs.

    • Then, separate and detach the rear casing.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Team

Cal Poly, Team 7-50, Amido Fall 2010 Membro di Cal Poly, Team 7-50, Amido Fall 2010

CPSU-AMIDO-F10S7G50

4 Membri

24 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 1,345