Introduzione

Replacing a cracked or malfunctioning LCD display screen.

Using the plastic opening tool, pry off the top faceplate.
  • Using the plastic opening tool, pry off the top faceplate.

  • Place the tool in the small crack that runs along the side of the phone and pry.

Aggiungi Commento

Using the T6 Torx Screwdriver remove all 4 small screws.
  • Using the T6 Torx Screwdriver remove all 4 small screws.

Aggiungi Commento

Remove silver plate from phone.
  • Remove silver plate from phone.

Aggiungi Commento

Using the spudger remove the plastic camera casing
  • Using the spudger remove the plastic camera casing

Aggiungi Commento

Using the iPod Opening Tool remove the yellow flex cable from the green logic board.
  • Using the iPod Opening Tool remove the yellow flex cable from the green logic board.

Aggiungi Commento

Use Spudger or hands to detach flex cable from front screen logic board
  • Use Spudger or hands to detach flex cable from front screen logic board

Aggiungi Commento

Using the plastic opening tool, lift the small black flap to unlock the screen from the logic board.
  • Using the plastic opening tool, lift the small black flap to unlock the screen from the logic board.

Aggiungi Commento

Using your fingers, carefully pull out the small LCD display screen.
  • Using your fingers, carefully pull out the small LCD display screen.

Aggiungi Commento

Remove the small LCD display screen completely from the green logic board.
  • Remove the small LCD display screen completely from the green logic board.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Cecilia

Membro da: 11/04/2010

1 Reputazione

3 Guide realizzate

Team

Cal Poly, Team 27-96, Amido Spring 2010 Membro di Cal Poly, Team 27-96, Amido Spring 2010

CPSU-AMIDO-S10S27G96

4 Membri

15 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 2

Tutti i Tempi: 2,619