Salta al contenuto principale

Motorola Q Global Speakers Replacement

Cosa ti serve

  1. Motorola Q Global Speakers Replacement, Battery: passo 1, immagine 1 di 1
    • Turn the phone face down.

    • Press and hold the release button in the middle of the back panel.

    • Slide the bottom panel down to remove.

  2. Motorola Q Global Speakers Replacement: passo 2, immagine 1 di 2 Motorola Q Global Speakers Replacement: passo 2, immagine 2 di 2
    • Remove the battery pack by prying it out with a fingernail, screw driver or other opening tool at the tab shown.

    • When reinserting the battery, make sure the contacts in the battery are lined up with the contacts in the phone.

  3. Motorola Q Global Speakers Replacement, Speakers: passo 3, immagine 1 di 1
    • Press inwardly on the upper casing until it pops out of the phone.

  4. Motorola Q Global Speakers Replacement: passo 4, immagine 1 di 1
    • Slide the upper case rightward and lift up.

    • Lift the camera sticker so that it does not get damaged.

  5. Motorola Q Global Speakers Replacement: passo 5, immagine 1 di 2 Motorola Q Global Speakers Replacement: passo 5, immagine 2 di 2
    • Remove the six labeled screws with a T5 torx screw driver.

  6. Motorola Q Global Speakers Replacement: passo 6, immagine 1 di 1
    • Once the screws are removed, use the plastic opening tool to remove the black casing.

  7. Motorola Q Global Speakers Replacement: passo 7, immagine 1 di 1
    • Remove the speakers by using the plastic remover tool.

  8. Motorola Q Global Speakers Replacement: passo 8, immagine 1 di 1
    • Insert the new speakers by gently pressing them down into place.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Team

Cal Poly, Team 6-31, Regan Fall 2012 Membro di Cal Poly, Team 6-31, Regan Fall 2012

CPSU-REGAN-F12S6G31

5 Membri

9 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 1

Tutti i Tempi: 623