Introduzione

This guide will focus on disassembling the necessary components for the phone in order to get to the camera hardware and remove it from the motherboard.

Parti

Nessuna parte richiesta.

Turn the phone face down.
  • Turn the phone face down.

  • Press and hold the release button in the middle of the back panel.

  • Slide the bottom panel down to remove.

Aggiungi Commento

Remove the battery pack by prying it out with a fingernail, screw driver or other opening tool at the tab shown. When reinserting the battery, make sure the contacts in the battery are lined up with the contacts in the phone.
  • Remove the battery pack by prying it out with a fingernail, screw driver or other opening tool at the tab shown.

  • When reinserting the battery, make sure the contacts in the battery are lined up with the contacts in the phone.

Aggiungi Commento

Press inward on the upper casing.
  • Press inward on the upper casing.

Aggiungi Commento

Slide the upper case to the right and lift up.
  • Slide the upper case to the right and lift up.

  • Lift the camera sticker so that it doesn't get damaged.

Aggiungi Commento

Remove the six labeled screws with a T5 Torx Screwdriver. Remove the six labeled screws with a T5 Torx Screwdriver.
  • Remove the six labeled screws with a T5 Torx Screwdriver.

Aggiungi Commento

Once the screws are removed, use the plastic opening tool to remove the black casing.
  • Once the screws are removed, use the plastic opening tool to remove the black casing.

Aggiungi Commento

Remove both screws on the mounted surface with a T5 screwdriver. Remove both screws on the mounted surface with a T5 screwdriver.
  • Remove both screws on the mounted surface with a T5 screwdriver.

Aggiungi Commento

Remove the glued, mounted surface by lifting it from underneath the SIM card slot by using the plastic opening tool. Remove the glued, mounted surface by lifting it from underneath the SIM card slot by using the plastic opening tool.
  • Remove the glued, mounted surface by lifting it from underneath the SIM card slot by using the plastic opening tool.

Aggiungi Commento

Use the plastic opening tool to lift the camera from the phone.
  • Use the plastic opening tool to lift the camera from the phone.

Aggiungi Commento

The new camera can now be attached to the motherboard.
  • The new camera can now be attached to the motherboard.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Team

Cal Poly, Team 6-31, Regan Fall 2012 Membro di Cal Poly, Team 6-31, Regan Fall 2012

CPSU-REGAN-F12S6G31

5 Membri

5 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 2

Tutti i Tempi: 552