Motion Computing LE1600 Display Screen Replacement

Introduzione

If your screen cracks or one of the pixels no longer functions correctly, you may need to replace the display screen. This guide will take you through the process of removing and replacing the display screen of the LE1600.

Cosa ti serve

Passo 1 Battery

Motion Computing LE1600 Display Screen Replacement, Battery: passo 1, immagine 1 di 1

Turn the device so the screen is facing down.

Traduci

Passo 2

Slide the battery lock switch next to the power slider to the unlocked position.

Traduci

Passo 3

Motion Computing LE1600 Display Screen Replacement: passo 3, immagine 3 di 3

Slide and hold the switch by the fan vent to the unlocked position. Firmly grasp the battery and pull away from tablet.
When replacing the battery, place the end near the fan vent in first. Make sure to keep the other switch in the unlocked position while pushing the battery into place.

Traduci

Passo 4 Display Screen

Motion Computing LE1600 Display Screen Replacement, Display Screen: passo 4, immagine 1 di 1

Unscrew hard drive panel using a Phillips head #1 screwdriver.
(Our device was not given to us with a hard drive or a hard drive panel)

Traduci

Passo 5

Motion Computing LE1600 Display Screen Replacement: passo 5, immagine 3 di 3

Pull clear plastic tab to detach hard drive from tablet.

Traduci

Passo 6

To disconnect the three white ribbon cables on the side closest to the hard drive connector, pull the white plastic tabs.

Traduci

Passo 7

Pull the brown tabs to disconnect the white ribbon cable on the other side.

Traduci

Passo 8

Caution: do not pull on the wires, instead pull from the plastic connectors.
To disconnect the remaining ribbon cables, pull the plastic connectors away from their connections.

Traduci

Passo 9

With a Phillips #1 screwdriver, Unscrew the nine 10mm screws holding the case together.

Traduci

Passo 10

Using a spudger, press in the five tabs on the side where the battery was.
This should separate the two halves of the device. Carefully set the side with the motherboard off to the side.

Traduci

Passo 11

Unplug the three ribbon cables by pulling on the brown tabs and unplugging cable.

Traduci

Passo 12

With a Phillips #1 screwdriver, unscrew the three 4mm screws holding the display bracket on the back side of the front buttons.

Traduci

Passo 13

Motion Computing LE1600 Display Screen Replacement: passo 13, immagine 3 di 3

On the bracket behind the fingerprint scanner, unscrew the two 4mm screws holding it to the display with a Phillips #1 screwdriver.
Fold away right bracket from display.

Traduci