Introduzione

This guide will show you how to dissemble the microphone. Before you start you need to have a set of screw drivers (Philips head #00, #2, #0). To reassemble the microphone just reverse the steps.

For names of the microphone parts, please click below:

Microphone Parts' Manual

Remove the windscreen. Using the Phillips head (#00) screwdriver, unscrew the diaphragm from the bottom base of the microphone.
  • Remove the windscreen. Using the Phillips head (#00) screwdriver, unscrew the diaphragm from the bottom base of the microphone.

Aggiungi Commento

Separate the microphone into two pieces to reveal the internal shield cover. Separate the microphone into two pieces to reveal the internal shield cover.
  • Separate the microphone into two pieces to reveal the internal shield cover.

Aggiungi Commento

By unscrewing in a clockwise motion remove the bottom base of the microphone. This should free up the bottom base so that it can be separated from the microphone.
  • By unscrewing in a clockwise motion remove the bottom base of the microphone.

  • This should free up the bottom base so that it can be separated from the microphone.

Aggiungi Commento

Using the Phillips head (#2) screwdriver, remove screw directly above the battery by rotating counterclockwise.
  • Using the Phillips head (#2) screwdriver, remove screw directly above the battery by rotating counterclockwise.

Aggiungi Commento

Using the Phillips head (#0) screwdriver to remove the black screw near the bottom of the microphone.
  • Using the Phillips head (#0) screwdriver to remove the black screw near the bottom of the microphone.

Aggiungi Commento

Use the heavy duty spudger to detach the grip area from the microphone. The inside of the diaphragm should now be visible. Use the heavy duty spudger to detach the grip area from the microphone. The inside of the diaphragm should now be visible. Use the heavy duty spudger to detach the grip area from the microphone. The inside of the diaphragm should now be visible.
  • Use the heavy duty spudger to detach the grip area from the microphone. The inside of the diaphragm should now be visible.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Documenti Allegati

Kefaya

Membro da: 23/01/2014

343 Reputazione

3 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 5

Ultimi 7 Giorni: 36

Ultimi 30 Giorni: 109

Tutti i Tempi: 2,322