Introduzione

If you need to replace the tire or inner tube, this guide will show you how to remove the rear wheel and remove both the tire and inner tube.

Strumenti

Parti

Nessuna parte richiesta.

Disconnect the rear brake cable
  • Disconnect the rear brake cable

Aggiungi Commento

Flip the bike over so that it is resting on the seat and handlebars.
  • Flip the bike over so that it is resting on the seat and handlebars.

  • Use an adjustable wrench to remove the nuts on both sides of the wheel that hold the wheel to the frame.

  • Lift the tire away from the frame and chain.

Aggiungi Commento

Insert one tire lever under the tire and hook it onto a spoke.  Insert the other tire lever next to the first and slide it along the rim to remove one side of the tire from the rim.
  • Insert one tire lever under the tire and hook it onto a spoke. Insert the other tire lever next to the first and slide it along the rim to remove one side of the tire from the rim.

Aggiungi Commento

Starting at the valve, pull the inner tube out of the gap between the rim and the tire.
  • Starting at the valve, pull the inner tube out of the gap between the rim and the tire.

Aggiungi Commento

Pull the tire away from the rim.
  • Pull the tire away from the rim.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

West Johnson

Membro da: 06/10/2014

146 Reputazione

1 Guida realizzata

Team

USF Tampa, Team 1-14, Donnelly Fall 2014 Membro di USF Tampa, Team 1-14, Donnelly Fall 2014

USFT-DONNELLY-F14S1G14

1 Membro

1 Guida realizzata

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 3

Ultimi 7 Giorni: 12

Ultimi 30 Giorni: 30

Tutti i Tempi: 936