Introduzione

Use this guide to remove the bottom of the outer case of your Mac Pro.

Parti

Nessuna parte richiesta.

Slide the lock switch to the right, to the unlocked position. Slide the lock switch to the right, to the unlocked position.
  • Slide the lock switch to the right, to the unlocked position.

Aggiungi Commento

Lift the outer case straight up off the Mac Pro. It may help to push down on the center of the fan while lifting the case up. It may help to push down on the center of the fan while lifting the case up.
  • Lift the outer case straight up off the Mac Pro.

  • It may help to push down on the center of the fan while lifting the case up.

Aggiungi Commento

Flip the Mac Pro upside down, 180 degrees. Remove five 5.1 mm T10 Torx screws from the outer perimeter of the lower case. Remove five 5.1 mm T10 Torx screws from the outer perimeter of the lower case.
  • Flip the Mac Pro upside down, 180 degrees.

  • Remove five 5.1 mm T10 Torx screws from the outer perimeter of the lower case.

Aggiungi Commento

Carefully lift the lower case up and remove it from the Mac Pro. Carefully lift the lower case up and remove it from the Mac Pro.
  • Carefully lift the lower case up and remove it from the Mac Pro.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Andrew Optimus Goldberg

Membro da: 17/10/2009

368.783 Reputazione

1.264 Guide realizzate

Team

iFixit Membro di iFixit

Community

115 Membri

5.778 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 9

Ultimi 30 Giorni: 17

Tutti i Tempi: 1,144