Introduzione

If your buttons are sticking and they cannot be cleaned from the outside, here is how you can clean it from the inside.

Parti

Nessuna parte richiesta.

To get into the controller, you will need to unscrew the 7 screws on the back.
  • To get into the controller, you will need to unscrew the 7 screws on the back.

    • You will have to remove the bottom oval sticker to reveal the screw circled in red.

Aggiungi Commento

With the screws removed, turn the controller upside down and separate the front end from the back end. It is likely that the buttons will fall out of place, so as you open the controller, try to keep track of where the pieces go. There should be the 4 circular buttons labeled 1-4, 4 smaller circular buttons for the D-Pad, and 3 rounded rectangular buttons.
  • With the screws removed, turn the controller upside down and separate the front end from the back end.

  • It is likely that the buttons will fall out of place, so as you open the controller, try to keep track of where the pieces go.

    • There should be the 4 circular buttons labeled 1-4, 4 smaller circular buttons for the D-Pad, and 3 rounded rectangular buttons.

Aggiungi Commento

Turn over the front side of the controller to remove all the buttons.
  • Turn over the front side of the controller to remove all the buttons.

  • Wipe each individual button down with a piece of cloth and rubbing alcohol.

Aggiungi Commento

Linea Traguardo

Altre 4 persone hanno completato questa guida.

Brian Neuman

Membro da: 20/01/2015

512 Reputazione

3 Guide realizzate

Team

USF Tampa, Team 7-4, Remmell Winter 2015 Membro di USF Tampa, Team 7-4, Remmell Winter 2015

USFT-REMMELL-W15S7G4

4 Membri

3 Guide realizzate

What is the right side of dpad buttons when put back?

There a polish side and another with fabric numbers. What side have to be up and down?

rodrigomarshmallow - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 2

Ultimi 7 Giorni: 13

Ultimi 30 Giorni: 52

Tutti i Tempi: 1,802