Introduzione

Remove the top cover of the optical drive to access the internals and replace any malfunctioning components.

Insert an open paper clip into the small hole on the left side of the faceplate. The tray should click open, extend it fully.
  • Insert an open paper clip into the small hole on the left side of the faceplate.

  • The tray should click open, extend it fully.

Aggiungi Commento

Use an opening device to push in the black tabs on the left, right and bottom of the outer chassis to unhook the faceplate. Use an opening device to push in the black tabs on the left, right and bottom of the outer chassis to unhook the faceplate. Use an opening device to push in the black tabs on the left, right and bottom of the outer chassis to unhook the faceplate.
  • Use an opening device to push in the black tabs on the left, right and bottom of the outer chassis to unhook the faceplate.

Aggiungi Commento

Pull the faceplate away from the main chassis.
  • Pull the faceplate away from the main chassis.

Aggiungi Commento

Unscrew the four 8.5 mm screws on the bottom chassis using a Philips #2 screwdriver.
  • Unscrew the four 8.5 mm screws on the bottom chassis using a Philips #2 screwdriver.

Aggiungi Commento

Lift the top and bottom chassis straight up in order to remove them. Lift the top and bottom chassis straight up in order to remove them.
  • Lift the top and bottom chassis straight up in order to remove them.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

James Biggs

Membro da: 12/10/2011

578 Reputazione

3 Guide realizzate

Team

Cal Poly, Team 6-5, Regan Fall 2011 Membro di Cal Poly, Team 6-5, Regan Fall 2011

CPSU-REGAN-F11S6G5

2 Membri

3 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 8

Tutti i Tempi: 2,305