Introduzione

This guide will show how to replace the guitar's battery pack. The battery pack supplies power to the controller and houses the two AA batteries required for the controller.

Strumenti

Nessun attrezzo richiesto.

Parti

Nessuna parte richiesta.

Remove batteries
  • Remove batteries

Aggiungi Commento

Remove void warranty sticker The sticker is covering a torx screw
  • Remove void warranty sticker

    • The sticker is covering a torx screw

Aggiungi Commento

Unscrew the 11 screws securing the back of the body using a T10 Torx screwdriver. Each screw is 1 cm long. Push level, this will detach the back of the guitar from the front. Carefully remove the back of the body
  • Unscrew the 11 screws securing the back of the body using a T10 Torx screwdriver. Each screw is 1 cm long.

  • Push level, this will detach the back of the guitar from the front.

  • Carefully remove the back of the body

    • The battery pack cord is attached to both sides of the guitar, be careful not to tear it apart.

    • The neck connector may be stuck to the back so be sure to detach it before fully pulling

Aggiungi Commento

Gently move the capacitor around until it breaks off Gently move the capacitor around until it breaks off
  • Gently move the capacitor around until it breaks off

Aggiungi Commento

Solder on the new capacitor.
  • Solder on the new capacitor.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Chris

Membro da: 18/10/2013

737 Reputazione

6 Guide realizzate

Yo can you help for the drum set I saw two wires detached ( red an black) when I I opened it up. Please email me so I can send a picture djcab361@outlook.com

Chris - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 6

Ultimi 7 Giorni: 19

Ultimi 30 Giorni: 103

Tutti i Tempi: 3,752