Introduzione

Lenovo ThinkPad Edge E530, E530c - how to replace / upgrade the Processor.

_________________________________________________

Panoramica Video

Switch-off the Laptop and remove the battery. The HDD/Memory Cover is held by 3x Phillips screws. Remove them. Remove the Cover.
  • Switch-off the Laptop and remove the battery.

  • The HDD/Memory Cover is held by 3x Phillips screws. Remove them.

  • Remove the Cover.

Aggiungi Commento

Disconnect the Fan cable. Remove the 2x screws from the Fan module. Unscrew 4x screws around the processor.
  • Disconnect the Fan cable.

  • Remove the 2x screws from the Fan module.

  • Unscrew 4x screws around the processor.

  • Carefully lift the Cooling System.

Aggiungi Commento

Use a lint-free cloth and isopropyl alcohol to clean the old thermal compound. If the thermal compound is solidified, you can use a flat end of any plastic tool to scrape it off. Separate the Fan from the Heat-sink.
  • Use a lint-free cloth and isopropyl alcohol to clean the old thermal compound.

  • If the thermal compound is solidified, you can use a flat end of any plastic tool to scrape it off.

  • Separate the Fan from the Heat-sink.

Aggiungi Commento

Use a soft anti static brush and clean the Heat-sink on the inside.
  • Use a soft anti static brush and clean the Heat-sink on the inside.

  • Before installing a new Cooling System or reinstalling the old one, you must clean the processor from the old thermal compound and put a new one.

Aggiungi Commento

Clean the old thermal compound. Use a lint-free cloth and isopropyl alcohol to clean the old thermal compound. If the thermal compound is solidified, you can use a flat end of any plastic tool to scrape it off. To remove the Processor, turn the CPU socket screw 90 degrees to open the socket.
  • Clean the old thermal compound. Use a lint-free cloth and isopropyl alcohol to clean the old thermal compound.

  • If the thermal compound is solidified, you can use a flat end of any plastic tool to scrape it off.

  • To remove the Processor, turn the CPU socket screw 90 degrees to open the socket.

  • Lift the Processor from the socket.

  • Be careful to lift straight up without bending the CPU pins.

Aggiungi Commento

Before you place the new Processor, be sure the socket screw is in the open position. Delicately place the Processor into the socket.
  • Before you place the new Processor, be sure the socket screw is in the open position.

  • Delicately place the Processor into the socket.

  • Close the socket with the socket screw.

  • Put thermal compound on the processor surface and carefully install back the Cooling system.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

ZFix

Membro da: 09/12/2013

153.703 Reputazione

433 Guide realizzate

Team

Master Techs Membro di Master Techs

Community

277 Membri

727 Guide realizzate

Bonjour, peut-on remplacer le CPU par n'importe quel autre plus puissant, ou y a-t-il des restrictions ?

francoislaurent - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 3

Ultimi 7 Giorni: 10

Ultimi 30 Giorni: 53

Tutti i Tempi: 3,373