Aggiusta la tua roba Comunità Store

Lenovo IdeaPad Flex 5-1470 Motherboard Replacement

Introduzione

This is a guide for how to replace a Lenovo IdeaPad Flex 5-1470 motherboard. Common reasons to replace the motherboard are because of overheating, power surges, old age or just overuse.

Cosa ti serve

  1. Lenovo IdeaPad Flex 5-1470 Motherboard Replacement, Back Panel: passo 1, immagine 1 di 1

    • Remove all ten 6.6 mm screws with a Phillips #00 screwdriver.

    Traduci

  2. Lenovo IdeaPad Flex 5-1470 Motherboard Replacement: passo 2, immagine 1 di 2 Lenovo IdeaPad Flex 5-1470 Motherboard Replacement: passo 2, immagine 2 di 2

    • Use the plastic opening tool to lift up and remove the casing.

    Traduci

  4. Lenovo IdeaPad Flex 5-1470 Motherboard Replacement, SSD: passo 3, immagine 1 di 1

    • Remove the single 3.6 mm screw using a Phillips #00 screwdriver.

    • The SSD will pop up on its own after removing the screw.

    Traduci

  5. Lenovo IdeaPad Flex 5-1470 Motherboard Replacement, Motherboard: passo 4, immagine 1 di 3 Lenovo IdeaPad Flex 5-1470 Motherboard Replacement, Motherboard: passo 4, immagine 2 di 3 Lenovo IdeaPad Flex 5-1470 Motherboard Replacement, Motherboard: passo 4, immagine 3 di 3

    • Use a Phillips #00 screwdriver to remove the three screws securing the fan.

    • Lift the fan up and out.

    • Use a Phillips #00 screwdriver to remove the three screws securing the hard drive.

    • Lift the hard drive up and out.

    Traduci

  6. Lenovo IdeaPad Flex 5-1470 Motherboard Replacement: passo 5, immagine 1 di 2 Lenovo IdeaPad Flex 5-1470 Motherboard Replacement: passo 5, immagine 2 di 2

    • Use a Phillips #00 screwdriver to remove the single screw securing the Wi-Fi card.

    • The Wi-Fi card will slightly lift away from the motherboard.

    • Pull the Wi-Fi card directly out of its port.

    Traduci

  7. Lenovo IdeaPad Flex 5-1470 Motherboard Replacement: passo 6, immagine 1 di 2 Lenovo IdeaPad Flex 5-1470 Motherboard Replacement: passo 6, immagine 2 di 2

    • Use a Phillips #00 screwdriver to remove the three screws securing the motherboard.

    • Gently disconnect the cables and ribbon cables connected to the motherboard.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 11

Ultimi 30 Giorni: 28

Tutti i Tempi: 407