Introduzione

The front keypad suffers a lot of wear-and-tear, but can be easily replaced. This guide will show you how to remove the old keypad so that you may install a new one.

Parti

Nessuna parte richiesta.

Remove the two triangular pads at the top of the two speakers.
  • Remove the two triangular pads at the top of the two speakers.

  • These pads have adhesive to keep them situated, so you may want to use a fine-tipped object, such as a screwdriver or a pen, to remove them. It is easiest to place the fine-tipped object in the small indent in the corner of these pads.

Aggiungi Commento

Remove the two rubber cylinders from their shafts. These cover more screws.
  • Remove the two rubber cylinders from their shafts. These cover more screws.

  • This requires a little more effort, so you may need to "dig" them out.

Aggiungi Commento

Now remove the four screws.
  • Now remove the four screws.

  • The screws are small, so put them somewhere that you can easily keep track of them.

Aggiungi Commento

Kit RAM Mac
Accelera il Mac. Porta la memoria al massimo.
Kit RAM Mac
Metti più memoria nel tuo Mac.
Starting on the side with blue square, pry the faceplate upwards with the flat end of a spudger.
  • Starting on the side with blue square, pry the faceplate upwards with the flat end of a spudger.

    • Continue to slide the flat edge along the seam of the faceplate.

  • You should hear popping or snapping noises as the faceplate is being removed.

Aggiungi Commento

The faceplate is attached by wires, so do not pull the faceplate very far away from the phone. The faceplate is attached by wires, so do not pull the faceplate very far away from the phone.
  • The faceplate is attached by wires, so do not pull the faceplate very far away from the phone.

Aggiungi Commento

The faceplate is still attached through speakers that travel from the ear-piece to the motherboard. Carefully wedge the flat or pointed end of the spudger beneath the ear-piece and the faceplate. This may require a bit of force, as the ear-piece is stuck to the faceplate with adhesive.
  • The faceplate is still attached through speakers that travel from the ear-piece to the motherboard.

  • Carefully wedge the flat or pointed end of the spudger beneath the ear-piece and the faceplate.

  • This may require a bit of force, as the ear-piece is stuck to the faceplate with adhesive.

Aggiungi Commento

The faceplate and keypad can now be completely removed from the phone.
  • The faceplate and keypad can now be completely removed from the phone.

Aggiungi Commento

Linea Traguardo

Aaron Rowley

Membro da: 21/01/2010

33 Reputazione

2 Guide realizzate

Team

Cal Poly, Team 16-32, Maness Winter 2010 Membro di Cal Poly, Team 16-32, Maness Winter 2010

CPSU-MANESS-W10S16G32

4 Membri

4 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 1,831