Introduzione

This guide is for dismantling the body of the LG VX6000, a step that is required for many other repairs

Parti

Nessuna parte richiesta.

Push the dark gray tab towards the top of the phone to release the battery.  The tab is located on the back of the phone.
  • Push the dark gray tab towards the top of the phone to release the battery. The tab is located on the back of the phone.

Remove battery

Ryan Brekke - Replica

Remove battery pack.
  • Remove battery pack.

  • You will need to unhook the bottom of the battery pack from the slot.

Aggiungi Commento

MANTA DRIVER KIT
112 bit driver kit $59.99
MANTA DRIVER KIT
112 bit driver kit $59.99
Set the battery aside.
  • Set the battery aside.

Aggiungi Commento

Pull the two rubber cushions out using tweezers.
  • Pull the two rubber cushions out using tweezers.

  • Only remove the two cushions that are circled!

Aggiungi Commento

Unscrew the six screws seen on the back using a Phillips 00 Screwdriver.
  • Unscrew the six screws seen on the back using a Phillips 00 Screwdriver.

  • Remove screws carefully on an uncluttered surface. They are very small and could get lost.

Aggiungi Commento

Remove the back of the phone using your hands.
  • Remove the back of the phone using your hands.

  • There is a pair of red and blue wires that plugs into the motherboard. These wires will snap if you force the pieces apart.

  • Remove the back of the phone very gently. Use your fingernail or tweezers to unplug the wires.

  • To reattach the back, you must plug these wires back in.

Aggiungi Commento

Linea Traguardo

Team

Cal Poly, Team 4-11, Forte Winter 2010 Membro di Cal Poly, Team 4-11, Forte Winter 2010

CPSU-FORTE-W10S4G11

5 Membri

10 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 7

Tutti i Tempi: 2,011