Introduzione

A guide on how to replace the logic board in the LG VX5400.

Parti

Nessuna parte richiesta.

Turn off the cell phone and turn it over on its back side
  • Turn off the cell phone and turn it over on its back side

Aggiungi Commento

Hold the phone case in your palm and slide the back cover towards yourself using your thumb
  • Hold the phone case in your palm and slide the back cover towards yourself using your thumb

Aggiungi Commento

Slide a tool or finger into the notch at the top of the battery  to carefully remove it. Slide a tool or finger into the notch at the top of the battery  to carefully remove it. Slide a tool or finger into the notch at the top of the battery  to carefully remove it.
  • Slide a tool or finger into the notch at the top of the battery to carefully remove it.

Aggiungi Commento

Take the Philips screwdriver and unscrew the four visible screws on the backside of the phone indicated by the four red circles.
  • Take the Philips screwdriver and unscrew the four visible screws on the backside of the phone indicated by the four red circles.

Aggiungi Commento

Then, take the pointed end of a spudger and pry out the rubber stopper to reveal the last screw at the top indicated with the blue circle.
  • Then, take the pointed end of a spudger and pry out the rubber stopper to reveal the last screw at the top indicated with the blue circle.

Aggiungi Commento

While the phone is open and faced up, carefully insert a tool into the middle to seperate the bottom half of the phone. While the phone is open and faced up, carefully insert a tool into the middle to seperate the bottom half of the phone.
  • While the phone is open and faced up, carefully insert a tool into the middle to seperate the bottom half of the phone.

Aggiungi Commento

Carefully slide out the keypad and remove the logic board. Then insert new the logic board. Carefully slide out the keypad and remove the logic board. Then insert new the logic board.
  • Carefully slide out the keypad and remove the logic board. Then insert new the logic board.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Sourabh

Membro da: 15/04/2010

132 Reputazione

6 Guide realizzate

Team

Cal Poly, Team 26-26, Regan Spring 2010 Membro di Cal Poly, Team 26-26, Regan Spring 2010

CPSU-REGAN-S10S26G26

4 Membri

10 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 3

Tutti i Tempi: 2,262