Introduzione

This guide illustrates how to replace the LG VX5300 keypad.

Parti

Nessuna parte richiesta.

Carefully slide battery cover off in a downward direction. Using the plastic opening tool, remove the battery. Light force may be necessary. Using the plastic opening tool, remove the battery. Light force may be necessary.
  • Carefully slide battery cover off in a downward direction.

  • Using the plastic opening tool, remove the battery. Light force may be necessary.

Aggiungi Commento

Using a Phillips #0 screwdriver, remove the five screws from the back cover and carefully set them aside.
  • Using a Phillips #0 screwdriver, remove the five screws from the back cover and carefully set them aside.

Aggiungi Commento

Using the plastic opening tool, carefully lift the back cover off.
  • Using the plastic opening tool, carefully lift the back cover off.

Aggiungi Commento

Before touching anything inside the phone: it is crucial that you are very cautious when working around the wiring and sensor bars. Look to the following photo for the location of the two sensor bars.
  • Before touching anything inside the phone: it is crucial that you are very cautious when working around the wiring and sensor bars.

  • Look to the following photo for the location of the two sensor bars.

  • Without disconnecting the orange wire, carefully flip the computer chip over and lay flat on the table, exposing the keypad.

Aggiungi Commento

Carefully remove the keypad and replace with the new keypad. If sensor bars behind the volume and camera buttons fall out, gently put them back in place behind the buttons.
  • Carefully remove the keypad and replace with the new keypad.

  • If sensor bars behind the volume and camera buttons fall out, gently put them back in place behind the buttons.

Aggiungi Commento

Carefully set the computer chip back in place.
  • Carefully set the computer chip back in place.

Aggiungi Commento

Place the back cover back on and secure it with the screws. Place the back cover back on and secure it with the screws.
  • Place the back cover back on and secure it with the screws.

Aggiungi Commento

Insert the battery. Slide the back cover on the phone.
  • Insert the battery.

  • Slide the back cover on the phone.

Aggiungi Commento

Linea Traguardo

Ashley

Membro da: 12/02/2013

9 Reputazione

3 Guide realizzate

Team

Ohio State, Team 1-1, Buehl Spring 2013 Membro di Ohio State, Team 1-1, Buehl Spring 2013

OSU-BUEHL-S13S1G1

3 Membri

4 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 2

Tutti i Tempi: 422