Introduzione

Use this guide to replace your Volume Toggle Button.

Parti

Nessuna parte richiesta.

First locate the button and the bottom of the cover where the arrow is. Press down on the button. While pushing down on the button, slide the cover up towards the hinge until the cover comes off. The battery will be visible after removing the back cover.
  • First locate the button and the bottom of the cover where the arrow is. Press down on the button.

  • While pushing down on the button, slide the cover up towards the hinge until the cover comes off.

  • The battery will be visible after removing the back cover.

Aggiungi Commento

Simultaneously push the battery forward and pull up from the bottom. Simultaneously push the battery forward and pull up from the bottom.
  • Simultaneously push the battery forward and pull up from the bottom.

Aggiungi Commento

Once the battery is loose it can be easily removed. The phone's ID tag will be visible once the battery is removed.
  • Once the battery is loose it can be easily removed. The phone's ID tag will be visible once the battery is removed.

  • Be careful of damaged or leaking batteries. If your battery appears damaged, remove it with care and find a replacement.

Aggiungi Commento

Remove the 7 phillips screws indicated by the red arrows using the phillips #0 screwdriver. Insert the flat end of the spudger in-between the black and  blue phone casing on the side of the phone and split the the blue and black apart. Work your way around the perimeter of the cover, loosening all corners. Insert the flat end of the spudger in-between the black and  blue phone casing on the side of the phone and split the the blue and black apart. Work your way around the perimeter of the cover, loosening all corners.
  • Remove the 7 phillips screws indicated by the red arrows using the phillips #0 screwdriver.

  • Insert the flat end of the spudger in-between the black and blue phone casing on the side of the phone and split the the blue and black apart. Work your way around the perimeter of the cover, loosening all corners.

Aggiungi Commento

Remove the internal back cover after loosening all the corners. The second picture below is what you will see after removing the internal back cover.
  • Remove the internal back cover after loosening all the corners.

  • The second picture below is what you will see after removing the internal back cover.

Aggiungi Commento

To remove the volume toggle button, use the spudger to push the original button out of its socket. After loosening the volume toggle button from its socket, finish pulling it out with your fingers. The demonstration pictures show the motherboard removed; however, this is not necessary to replace the volume toggle.
  • To remove the volume toggle button, use the spudger to push the original button out of its socket.

  • After loosening the volume toggle button from its socket, finish pulling it out with your fingers.

  • The demonstration pictures show the motherboard removed; however, this is not necessary to replace the volume toggle.

Aggiungi Commento

To finish the replacement, insert your new volume toggle button and reassemble your LG LX150 to resume use.
  • To finish the replacement, insert your new volume toggle button and reassemble your LG LX150 to resume use.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Andrea

Membro da: 19/04/2010

110 Reputazione

8 Guide realizzate

Team

Cal Poly, Team 10-44, Garner Spring 2010 Membro di Cal Poly, Team 10-44, Garner Spring 2010

CPSU-GARNER-S10S10G44

4 Membri

18 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 1,458