Remove the back cover by placing your fingernail in the crease between the cover and the charging port.
  • Remove the back cover by placing your fingernail in the crease between the cover and the charging port.

  • Pry upward and the cover should pop off easily.

Aggiungi Commento

Remove the battery from the battery bay by prying with your finger at the groove on the lower end of the battery bay.
  • Remove the battery from the battery bay by prying with your finger at the groove on the lower end of the battery bay.

Aggiungi Commento

Locate 10 screws and remove each one using a screw driver. Locate 10 screws and remove each one using a screw driver.
  • Locate 10 screws and remove each one using a screw driver.

Aggiungi Commento

Use a plastic spudger tool to pry away the cover by placing it between the cover and the screen bezel.
  • Use a plastic spudger tool to pry away the cover by placing it between the cover and the screen bezel.

  • Pry all the way around the phone about every centimeter until the cover is completely separated from the phone.

Aggiungi Commento

Locate the rear facing camera. Pry the ribbon cable off of it's connector using the plastic spudger tool. Use your finger to remove the camera.
  • Locate the rear facing camera.

  • Pry the ribbon cable off of it's connector using the plastic spudger tool.

  • Use your finger to remove the camera.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Team

UMass Dartmouth, Team 1-9, Shastany Fall 2014 Membro di UMass Dartmouth, Team 1-9, Shastany Fall 2014

UMASSD-SHASTANY-F14S1G9

3 Membri

5 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 12

Tutti i Tempi: 1,413