Introduzione

If your LG EnV Touch VX11000 shuts down unexpectedly or the screen is broken or malfunctioning, you may need to replace the motherboard. This guide will show you how to replace the motherboard in an LG EnV Touch VX11000.

Turn the phone off.
  • Turn the phone off.

  • Flip it over so the front screen is facing down.

Aggiungi Commento

Slide the release latch down and toward you while lifting up on the left side of the battery cover.
  • Slide the release latch down and toward you while lifting up on the left side of the battery cover.

Aggiungi Commento

Lift the edge of the battery to remove it. Lift the edge of the battery to remove it.
  • Lift the edge of the battery to remove it.

Aggiungi Commento

Locate the three screw covers on the back of the phone. Using your fingernail (or a spudger, pry off screw covers. Using a Phillips #000 Screwdriver, remove the 1.5mm #000 Phillips screws that were under the screw covers.
  • Locate the three screw covers on the back of the phone. Using your fingernail (or a spudger, pry off screw covers.

  • Using a Phillips #000 Screwdriver, remove the 1.5mm #000 Phillips screws that were under the screw covers.

Aggiungi Commento

Locate the two inner 1.5mm #000 Phillips screws and remove them using a Phillips #000 screwdriver.
  • Locate the two inner 1.5mm #000 Phillips screws and remove them using a Phillips #000 screwdriver.

Aggiungi Commento

Use a plastic opening tool or your fingernail to pry off the back case. The camera and volume keys will fall off.
  • Use a plastic opening tool or your fingernail to pry off the back case.

  • The camera and volume keys will fall off.

Aggiungi Commento

Use your fingers to pull up on the tab in order to unplug it. Use your fingers to pull up on the tab in order to unplug it.
  • Use your fingers to pull up on the tab in order to unplug it.

Aggiungi Commento

Using both of your hands, gently pry out the motherboard by pulling up on both ends. Using both of your hands, gently pry out the motherboard by pulling up on both ends.
  • Using both of your hands, gently pry out the motherboard by pulling up on both ends.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Rachel Smith

Membro da: 30/09/2013

578 Reputazione

10 Guide realizzate

Team

Cal Poly, Team 13-2, Forte Fall 2013 Membro di Cal Poly, Team 13-2, Forte Fall 2013

CPSU-FORTE-F13S13G2

4 Membri

10 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 4

Tutti i Tempi: 353