Aggiusta la tua roba Comunità Store

Kyocera QCP-2035 Speaker Replacement

Introduzione

You will learn how to disassemble the phone and remove the speaker safely.

Cosa ti serve

  1. Kyocera QCP-2035 Speaker Replacement, Remove Back Cover: passo 1, immagine 1 di 3 Kyocera QCP-2035 Speaker Replacement, Remove Back Cover: passo 1, immagine 2 di 3 Kyocera QCP-2035 Speaker Replacement, Remove Back Cover: passo 1, immagine 3 di 3

    • When looking at the back of the phone, you will see a horizontal line and three raised segments of plastic in the form of a triangle.

    • Place thumb on top of the triangle and press into the phone while sliding your thumb towards the bottom of the phone.

    • In 5 mm it will stop sliding.

    Traduci

  2. Kyocera QCP-2035 Speaker Replacement: passo 2, immagine 1 di 3 Kyocera QCP-2035 Speaker Replacement: passo 2, immagine 2 di 3 Kyocera QCP-2035 Speaker Replacement: passo 2, immagine 3 di 3

    • Grab the bottom of the back cover with your other hand and pull the cover the rest of the way off.

    • Turn the phone over slowly. The battery will fall out on its own.

    Traduci

  4. Kyocera QCP-2035 Speaker Replacement: passo 3, immagine 1 di 3 Kyocera QCP-2035 Speaker Replacement: passo 3, immagine 2 di 3 Kyocera QCP-2035 Speaker Replacement: passo 3, immagine 3 di 3

    • Rotate the phone so the bottom is facing you. There is a small indent on the plastic face.

    • Using the tip of your fingernail or a spudger, pry the cover away from the rest of the phone.

    • Once the cover starts to part, keep separating until the top notches detach.

    Traduci

  5. Kyocera QCP-2035 Speaker Replacement: passo 4, immagine 1 di 3 Kyocera QCP-2035 Speaker Replacement: passo 4, immagine 2 di 3 Kyocera QCP-2035 Speaker Replacement: passo 4, immagine 3 di 3

    • With the cover plate separated, you will see (6) T6x11mm torx screws recessed in the white plastic.

    • Remove screws.

    • The white plastic face plate lifts right off, exposing the main board.

    Traduci

  6. Kyocera QCP-2035 Speaker Replacement, Speaker: passo 5, immagine 1 di 3 Kyocera QCP-2035 Speaker Replacement, Speaker: passo 5, immagine 2 di 3 Kyocera QCP-2035 Speaker Replacement, Speaker: passo 5, immagine 3 di 3

    • Locate the speaker at the top of the phone right above the screen.

    • Using a spudger or pair of tweezers, gently rock and pry from between the speaker and the main board.

    • There are three plastic tabs holding the speaker, which are located at the back of the speaker.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Autore

con 4 altri collaboratori

Jeremiah

Membro da: 01/21/15

122 Reputazione

1 Guida realizzata

Distintivi: 7

+4 altri distintivi

Team

USF Tampa, Team 5-3, Brown Winter 2015 Membro di USF Tampa, Team 5-3, Brown Winter 2015

USFT-BROWN-W15S5G3

4 Membri

12 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 1

Tutti i Tempi: 133