Introduzione

This guide will show you how to replace your Kurio's battery.

Make sure to open the back cover easily using the plastic opening tool.
  • Make sure to open the back cover easily using the plastic opening tool.

Aggiungi Commento

Remove back cover by prying away from the device. The easiest place to remove the cover is from the bottom and top, then try to open it from the right and left sides. Open it gently. Do not open it with too much pressure, so that the plastic back cover do not break.
  • Remove back cover by prying away from the device.

  • The easiest place to remove the cover is from the bottom and top, then try to open it from the right and left sides.

  • Open it gently. Do not open it with too much pressure, so that the plastic back cover do not break.

Aggiungi Commento

To remove the battery, make sure the four 5mm Philips screws on each side of your device is open using the Phillips #1 Screwdriver. To remove the battery, make sure the four 5mm Philips screws on each side of your device is open using the Phillips #1 Screwdriver. To remove the battery, make sure the four 5mm Philips screws on each side of your device is open using the Phillips #1 Screwdriver.
  • To remove the battery, make sure the four 5mm Philips screws on each side of your device is open using the Phillips #1 Screwdriver.

Aggiungi Commento

After you remove your four screws use your plastic opening tool to help you open the plastic cover of your device.
  • After you remove your four screws use your plastic opening tool to help you open the plastic cover of your device.

Aggiungi Commento

Use the plastic opening tool to remove the battery from its place.
  • Use the plastic opening tool to remove the battery from its place.

  • The battery is glued into the device. So try removing it gently.

Aggiungi Commento

Remove the two wires using soldering tool to detach your bad battery from the device .
  • Remove the two wires using soldering tool to detach your bad battery from the device .

  • Gently remove the wires one by one. Do not damage the head that is glued into the motherboard.

  • For more information on how to solder and desolder the wire Click here

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Khalid AlTamimi

Membro da: 21/01/2015

251 Reputazione

2 Guide realizzate

Team

USF Tampa, Team 6-5, Brown Winter 2015 Membro di USF Tampa, Team 6-5, Brown Winter 2015

USFT-BROWN-W15S6G5

3 Membri

5 Guide realizzate

do you know where to buy a replacement battery ?

Phil Bowring - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 8

Tutti i Tempi: 1,147