Introduzione

If the power/volume button is stuck, replace it by following these steps. This guide requires the removal of the screen. This takes care, but the steps are easy to carry out.

Begin by removing the rubber cover from the Kurio 7. Begin by removing the rubber cover from the Kurio 7. Begin by removing the rubber cover from the Kurio 7.
  • Begin by removing the rubber cover from the Kurio 7.

Aggiungi Commento

Remove the  four 30 mm Phillips #00 screws from the outer case. Remove the  four 30 mm Phillips #00 screws from the outer case.
  • Remove the four 30 mm Phillips #00 screws from the outer case.

Aggiungi Commento

Insert the plastic opening tool in the gap between the front cover and the back cover of the device. Slide the plastic opening tool around the edge of the device. Gently pry apart the tabs that hold the front cover and the back cover together.
  • Insert the plastic opening tool in the gap between the front cover and the back cover of the device.

  • Slide the plastic opening tool around the edge of the device. Gently pry apart the tabs that hold the front cover and the back cover together.

  • Be careful not to break off the tabs that hold the front cover and the back cover together.

Aggiungi Commento

Once all of the tabs are removed, the back cover should come off easily. Gently remove the back cover. There are wires inside that may get caught on the cover while removing it. These wires are soldered to their components and are difficult to reattach.
  • Once all of the tabs are removed, the back cover should come off easily.

  • Gently remove the back cover. There are wires inside that may get caught on the cover while removing it. These wires are soldered to their components and are difficult to reattach.

Aggiungi Commento

Use a plastic credit card, or other thin object, to separate the battery from the screen. Be sure to work the card carefully and slowly around in order to not damage, break, or deform the battery.
  • Use a plastic credit card, or other thin object, to separate the battery from the screen.

  • Be sure to work the card carefully and slowly around in order to not damage, break, or deform the battery.

  • Carefully set the battery aside.

Aggiungi Commento

Use a Phillips #00 screwdriver to remove the eight 40mm screws holding the motherboard in place. Use a Phillips #00 screwdriver to remove the eight 40mm screws holding the motherboard in place.
  • Use a Phillips #00 screwdriver to remove the eight 40mm screws holding the motherboard in place.

Aggiungi Commento

Place the plastic opening tool on the base of the black ribbon clip and pull up, like a lever, to release the mount. This should release the clip holding the ribbon to the mount. Pull the ribbon out of the mount. Pull the ribbon out of the mount.
  • Place the plastic opening tool on the base of the black ribbon clip and pull up, like a lever, to release the mount. This should release the clip holding the ribbon to the mount.

  • Pull the ribbon out of the mount.

Aggiungi Commento

There should be masking tape on the yellow ribbon. Pull the tape off of the motherboard and wrap it around the yellow ribbon.
  • There should be masking tape on the yellow ribbon. Pull the tape off of the motherboard and wrap it around the yellow ribbon.

  • Do not pull the tape completely off the motherboard, as it is used to protect components on the ribbon.

  • To remove the ribbon from the mount, follow the same steps in Step 3.

Aggiungi Commento

Pull back the ribbons and put the battery near the bottom of the Kurio.
  • Pull back the ribbons and put the battery near the bottom of the Kurio.

  • The motherboard is now removed so that other components can be worked on.

Aggiungi Commento

Flip motherboard down near base of device.
  • Flip motherboard down near base of device.

  • Be careful not to pull out any wires when moving the motherboard.

Aggiungi Commento

This is tricky, and an extra pair of hands may help. Use the opening tool to pry the screen out from underneath the tabs holding it in place. Once you have created some space between the screen and the cover, slide the opening tool under the screen. Slide the opening tool around the outside of the screen, releasing the tabs as you go along.
  • This is tricky, and an extra pair of hands may help. Use the opening tool to pry the screen out from underneath the tabs holding it in place.

  • Once you have created some space between the screen and the cover, slide the opening tool under the screen.

  • Slide the opening tool around the outside of the screen, releasing the tabs as you go along.

  • Be careful not to pull too hard on the motherboard while doing this, as there are still many wires attached to the body of the device.

Aggiungi Commento

Pull the screen out from the casing. You have successfully removed the screen! You have successfully removed the screen!
  • Pull the screen out from the casing.

  • You have successfully removed the screen!

Aggiungi Commento

Locate the volume button. It will be located at the corner adjacent to the speaker. Pull out the detached power key.
  • Locate the volume button. It will be located at the corner adjacent to the speaker.

  • Pull out the detached power key.

Aggiungi Commento

Remove volume button by using the opening tool to push inward from the outside while pulling on it from the inside using the tweezers. Don't be afraid to press hard with the opening tool. Extra force may be needed to remove the volume button.
  • Remove volume button by using the opening tool to push inward from the outside while pulling on it from the inside using the tweezers.

  • Don't be afraid to press hard with the opening tool. Extra force may be needed to remove the volume button.

Aggiungi Commento

Conclusione

Inserting the replacement part may be tricky. Do not force the new part in, as it may break. To reassemble your device, follow these instructions in reverse order.

Omri Nissan

Membro da: 16/04/2014

321 Reputazione

2 Guide realizzate

Team

Cal Poly, Team 12-36, Maness Spring 2014 Membro di Cal Poly, Team 12-36, Maness Spring 2014

CPSU-MANESS-S14S12G36

4 Membri

7 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 4

Ultimi 30 Giorni: 28

Tutti i Tempi: 2,792