Salta al contenuto principale

Kurio 7 Back Panel Replacement

Cosa ti serve

  1. Kurio 7 Back Panel Replacement, Back Panel: passo 1, immagine 1 di 3 Kurio 7 Back Panel Replacement, Back Panel: passo 1, immagine 2 di 3 Kurio 7 Back Panel Replacement, Back Panel: passo 1, immagine 3 di 3
    • Begin by removing the rubber cover from the Kurio 7.

  2. Kurio 7 Back Panel Replacement: passo 2, immagine 1 di 2 Kurio 7 Back Panel Replacement: passo 2, immagine 2 di 2
    • Remove the four 30 mm Phillips #00 screws from the outer case.

  3. Kurio 7 Back Panel Replacement: passo 3, immagine 1 di 2 Kurio 7 Back Panel Replacement: passo 3, immagine 2 di 2
    • Insert the plastic opening tool in the gap between the front cover and the back cover of the device.

    • Slide the plastic opening tool around the edge of the device. Gently pry apart the tabs that hold the front cover and the back cover together.

    • Be careful not to break off the tabs that hold the front cover and the back cover together.

  4. Kurio 7 Back Panel Replacement: passo 4, immagine 1 di 2 Kurio 7 Back Panel Replacement: passo 4, immagine 2 di 2
    • Once all of the tabs are removed, the back cover should come off easily.

    • Gently remove the back cover. There are wires inside that may get caught on the cover while removing it. These wires are soldered to their components and are difficult to reattach.

Conclusione

Replace with a new back panel. To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Eric Rice

Membro da: 04/14/14

913 Reputazione

3 Guide realizzate

Team

Cal Poly, Team 12-36, Maness Spring 2014 Membro di Cal Poly, Team 12-36, Maness Spring 2014

CPSU-MANESS-S14S12G36

4 Membri

14 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 5

Tutti i Tempi: 2,557