Introduzione

First, Front Cover Teardown guide must be used to get inside the camera in order to remove the lens.

Parti

Nessuna parte richiesta.

Have the camera facing up and the flash closest to you.
  • Have the camera facing up and the flash closest to you.

  • Unscrew the two 6.2 mm Phillips screws on the top half of the camera.

Aggiungi Commento

Flip camera to other side-with flash farthest from you.
  • Flip camera to other side-with flash farthest from you.

  • Unscrew top two 6.2mm Phillips screws on this side.

Aggiungi Commento

Turn the camera so the bottom is facing up with the front facing away.
  • Turn the camera so the bottom is facing up with the front facing away.

  • Unscrew the 6.2mm Phillips screw on the top right.

  • The front cover is now unscrewed and should be lifted up evenly and removed.

Aggiungi Commento

Remove the two 6.2mm Phillips screws on either side of the lens on the metal plate.
  • Remove the two 6.2mm Phillips screws on either side of the lens on the metal plate.

Aggiungi Commento

Pull aside the top plastic piece resting on the metal lens plate in order to access the other screws.
  • Pull aside the top plastic piece resting on the metal lens plate in order to access the other screws.

Aggiungi Commento

To remove other screws, metal panel must be lifted up slightly to access.
  • To remove other screws, metal panel must be lifted up slightly to access.

  • Lift metal panel and insert screwdriver through holes in panel to reach screws underneath. Remove the two 6.2mm Phillips screws.

Aggiungi Commento

Look at the black plate on the right side of the lens that the metal plate is resting on.
  • Look at the black plate on the right side of the lens that the metal plate is resting on.

  • Unscrew two 6.2mm Phillips screws on the black plate next to the lens.

  • At this point, all screws are removed and lens can should be carefully lifted and removed, including both plates and the plastic ring around the lens.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Michelle

Membro da: 04/04/2011

86 Reputazione

5 Guide realizzate

Team

Cal Poly, Team 25-28, Garner Spring 2011 Membro di Cal Poly, Team 25-28, Garner Spring 2011

CPSU-GARNER-S11S25G28

4 Membri

6 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 3

Tutti i Tempi: 1,309