Introduzione

Use this guide to replace the front cover.

Parti

Nessuna parte richiesta.

Have the camera facing up and the flash closest to you.
  • Have the camera facing up and the flash closest to you.

  • Unscrew the two 6.2 mm Phillips screws on the top half of the camera.

Aggiungi Commento

Kit RAM Mac
Accelera il Mac. Porta la memoria al massimo.
Kit RAM Mac
Metti più memoria nel tuo Mac.
Flip camera to other side-with flash farthest from you.
  • Flip camera to other side-with flash farthest from you.

  • Unscrew top two 6.2mm Phillips screws on this side.

Aggiungi Commento

Turn the camera so the bottom is facing up with the front facing away.
  • Turn the camera so the bottom is facing up with the front facing away.

  • Unscrew the 6.2mm Phillips screw on the top right.

  • The front cover is now unscrewed and should be lifted up evenly and removed.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Michelle

Membro da: 04/04/2011

86 Reputazione

5 Guide realizzate

Team

Cal Poly, Team 25-28, Garner Spring 2011 Membro di Cal Poly, Team 25-28, Garner Spring 2011

CPSU-GARNER-S11S25G28

4 Membri

6 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 2

Tutti i Tempi: 1,670