Introduzione

Use this guide to replace the back cover.

Parti

Nessuna parte richiesta.

Remove the two 6.2mm Phillips screws on both sides of camera's back cover. Remove the two 6.2mm Phillips screws on both sides of camera's back cover.
  • Remove the two 6.2mm Phillips screws on both sides of camera's back cover.

Aggiungi Commento

Turn camera so the bottom is facing up and the front is facing away.
  • Turn camera so the bottom is facing up and the front is facing away.

  • Remove the two 6.2mm Phillips screws on the bottom back cover of the camera.

  • Back cover is now unscrewed an can be removed.

Aggiungi Commento

Have the back of the camera facing up.
  • Have the back of the camera facing up.

  • Unscrew the 6.2mm Phillips screw next to the viewfinder.

  • The back cover is now unscrewed. Lift up and pull the cover off evenly.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Michelle

Membro da: 04/04/2011

86 Reputazione

5 Guide realizzate

Team

Cal Poly, Team 25-28, Garner Spring 2011 Membro di Cal Poly, Team 25-28, Garner Spring 2011

CPSU-GARNER-S11S25G28

4 Membri

6 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 1,017