Introduzione

Use this guide to remove the capacitor.

Parti

Nessuna parte richiesta.

Position the camera with the bottom facing up. With your finger, slide the battery cover in the direction of open arrow. The battery cover will spring open, so be careful to lift it up gently.
  • Position the camera with the bottom facing up.

  • With your finger, slide the battery cover in the direction of open arrow.

  • The battery cover will spring open, so be careful to lift it up gently.

Aggiungi Commento

Use a Phillips #00 screwdriver to remove the seven 4.5mm screws. There are 2 on the left There are 2 on the right
  • Use a Phillips #00 screwdriver to remove the seven 4.5mm screws.

    • There are 2 on the left

    • There are 2 on the right

    • There are 3 on the bottom

Aggiungi Commento

Firmly grasp and pull back casing off. Firmly grasp and pull back casing off. Firmly grasp and pull back casing off.
  • Firmly grasp and pull back casing off.

Aggiungi Commento

With battery door open, grasp the front case and remove it from the camera. With battery door open, grasp the front case and remove it from the camera. With battery door open, grasp the front case and remove it from the camera.
  • With battery door open, grasp the front case and remove it from the camera.

Aggiungi Commento

Orient the camera with the lens facing you. Use a Phillips #00 screwdriver to remove the one 2.2mm screw on the plastic bridge.
  • Orient the camera with the lens facing you.

  • Use a Phillips #00 screwdriver to remove the one 2.2mm screw on the plastic bridge.

  • Lift the plastic bridge off and place it to the side.

Aggiungi Commento

Do not touch the capacitor contact points for any reason. This will result in a severe shock.
  • Do not touch the capacitor contact points for any reason. This will result in a severe shock.

Aggiungi Commento

Grasp the capacitor, carefully remove it from its holder, and place it off to the side. Grasp the capacitor, carefully remove it from its holder, and place it off to the side. Grasp the capacitor, carefully remove it from its holder, and place it off to the side.
  • Grasp the capacitor, carefully remove it from its holder, and place it off to the side.

Aggiungi Commento

De-solder the connections at the base of the capacitor
  • De-solder the connections at the base of the capacitor

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Alan Galarza

Membro da: 03/10/2010

69 Reputazione

3 Guide realizzate

Team

Cal Poly, Team 7-51, Amido Fall 2010 Membro di Cal Poly, Team 7-51, Amido Fall 2010

CPSU-AMIDO-F10S7G51

4 Membri

7 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 5

Ultimi 30 Giorni: 11

Tutti i Tempi: 3,325