Introduzione

Use this guide to remove the back case.

Parti

Nessuna parte richiesta.

Position the camera with the bottom facing up. With your finger, slide the battery cover in the direction of open arrow. The battery cover will spring open, so be careful to lift it up gently.
  • Position the camera with the bottom facing up.

  • With your finger, slide the battery cover in the direction of open arrow.

  • The battery cover will spring open, so be careful to lift it up gently.

Aggiungi Commento

Use a Phillips #00 screwdriver to remove the seven 4.5mm screws. There are 2 on the left There are 2 on the right
  • Use a Phillips #00 screwdriver to remove the seven 4.5mm screws.

    • There are 2 on the left

    • There are 2 on the right

    • There are 3 on the bottom

Aggiungi Commento

Firmly grasp and pull back casing off. Firmly grasp and pull back casing off. Firmly grasp and pull back casing off.
  • Firmly grasp and pull back casing off.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Dustin Rodgers

Membro da: 05/10/2010

50 Reputazione

4 Guide realizzate

Team

Cal Poly, Team 7-51, Amido Fall 2010 Membro di Cal Poly, Team 7-51, Amido Fall 2010

CPSU-AMIDO-F10S7G51

4 Membri

7 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 1,378