Introduzione

These instructions will demonstrate how to remove the speaker from the KDDI Kyocera A5521K.

Turn the phone over to expose the battery cover. Apply pressure to the back of the battery cover to slide it down. The battery cover is now separate from the phone.
  • Turn the phone over to expose the battery cover.

  • Apply pressure to the back of the battery cover to slide it down.

  • The battery cover is now separate from the phone.

Aggiungi Commento

Remove the battery by pushing it up and out from the bottom. The battery, cover, and phone should now be separated. The battery, cover, and phone should now be separated.
  • Remove the battery by pushing it up and out from the bottom.

  • The battery, cover, and phone should now be separated.

Aggiungi Commento

Pry, with a metal probe, the black covers that are located by the pivoting joints of the phone. Beneath the covers are screws. Beneath the covers are screws.
  • Pry, with a metal probe, the black covers that are located by the pivoting joints of the phone.

    • Beneath the covers are screws.

Aggiungi Commento

Remove the screws using a Y0 screwdriver.
  • Remove the screws using a Y0 screwdriver.

Aggiungi Commento

Use the iPod pry tool to remove the outer screen. Two screws are now visible. Be careful not to crack the screen upon removal.  It is adhered strongly to the phone.
  • Use the iPod pry tool to remove the outer screen.

    • Two screws are now visible.

    • Be careful not to crack the screen upon removal. It is adhered strongly to the phone.

Aggiungi Commento

Use the Y0 screwdriver to remove the screws.
  • Use the Y0 screwdriver to remove the screws.

Aggiungi Commento

Use the iPod pry tool to loosen the faceplate from the phone. Slide the pry tool along the entire crease of the faceplate to completely detach it.
  • Use the iPod pry tool to loosen the faceplate from the phone.

    • Slide the pry tool along the entire crease of the faceplate to completely detach it.

Aggiungi Commento

Separate the faceplate from the phone. Separate the faceplate from the phone. Separate the faceplate from the phone.
  • Separate the faceplate from the phone.

Aggiungi Commento

Turn the phone over. Place a spudger in the oval shaped speaker opening of the phone (indicated by the red rectangle).
  • Turn the phone over.

  • Place a spudger in the oval shaped speaker opening of the phone (indicated by the red rectangle).

  • Turn the phone so the exposed circuit board faces upward.

    • Keep the spudger in the speaker while turning the phone.

    • The speaker is indicated by the yellow rectangle.

Aggiungi Commento

Push the spudger through the speaker opening to separate the speaker (indicated by the yellow rectangle). Push the spudger through the speaker opening to separate the speaker (indicated by the yellow rectangle).
  • Push the spudger through the speaker opening to separate the speaker (indicated by the yellow rectangle).

Aggiungi Commento

Grasp the speaker (indicated by the yellow rectangle) with tweezers, or with your fingers if you can manage a firm grip. Firmly remove the speaker. Firmly remove the speaker.
  • Grasp the speaker (indicated by the yellow rectangle) with tweezers, or with your fingers if you can manage a firm grip.

  • Firmly remove the speaker.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Dominic Grisafe

Membro da: 15/04/2010

133 Reputazione

20 Guide realizzate

Team

Cal Poly, Team 28-25, Regan Spring 2010 Membro di Cal Poly, Team 28-25, Regan Spring 2010

CPSU-REGAN-S10S28G25

4 Membri

20 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 1,713