Introduzione

These instructions will demonstrate how to remove the front LCD screen from the KDDI Kyocera A5521K.

Pry, with a metal probe, the black covers that are located by the pivoting joints of the phone. Beneath the covers are screws. Beneath the covers are screws.
  • Pry, with a metal probe, the black covers that are located by the pivoting joints of the phone.

    • Beneath the covers are screws.

Aggiungi Commento

Remove the screws using a Y0 screwdriver.
  • Remove the screws using a Y0 screwdriver.

Aggiungi Commento

Use the iPod pry tool to remove the outer screen. Two screws are now visible. Be careful not to crack the screen upon removal.  It is adhered strongly to the phone.
  • Use the iPod pry tool to remove the outer screen.

    • Two screws are now visible.

    • Be careful not to crack the screen upon removal. It is adhered strongly to the phone.

Aggiungi Commento

Use the Y0 screwdriver to remove the screws.
  • Use the Y0 screwdriver to remove the screws.

Aggiungi Commento

Use the iPod pry tool to loosen the faceplate from the phone. Slide the pry tool along the entire crease of the faceplate to completely detach it.
  • Use the iPod pry tool to loosen the faceplate from the phone.

    • Slide the pry tool along the entire crease of the faceplate to completely detach it.

Aggiungi Commento

Separate the faceplate from the phone. Separate the faceplate from the phone. Separate the faceplate from the phone.
  • Separate the faceplate from the phone.

Aggiungi Commento

Rotate the phone 180 degrees. Grab the flexible circuit with tweezers (or use your fingers if you can manage a firm grip). Pull the flexible circuit to towards you to separate the front LCD screen from the phone.
  • Rotate the phone 180 degrees.

  • Grab the flexible circuit with tweezers (or use your fingers if you can manage a firm grip).

  • Pull the flexible circuit to towards you to separate the front LCD screen from the phone.

Aggiungi Commento

Firmly pull the flexible circuit from the connector. Be careful not to damage the flexible circuit. The front LCD screen should now be separate from the phone.
  • Firmly pull the flexible circuit from the connector.

    • Be careful not to damage the flexible circuit.

    • The front LCD screen should now be separate from the phone.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Dominic Grisafe

Membro da: 15/04/2010

133 Reputazione

20 Guide realizzate

Team

Cal Poly, Team 28-25, Regan Spring 2010 Membro di Cal Poly, Team 28-25, Regan Spring 2010

CPSU-REGAN-S10S28G25

4 Membri

20 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 1,248