Salta al contenuto principale

Justin Bieber Concert Microphone On/Off Switch Replacement

Cosa ti serve

  1. Justin Bieber Concert Microphone On/Off Switch Replacement, Removing back panel: passo 1, immagine 1 di 2 Justin Bieber Concert Microphone On/Off Switch Replacement, Removing back panel: passo 1, immagine 2 di 2
    Attrezzo utilizzato in questo passaggio:
    Flathead 1.5 mm Screwdriver
    $5.49
    Compra
    • Remove the back panel of the device by unscrewing the single #8 11.6 mm Flathead screw on the back of the device.

  2. Justin Bieber Concert Microphone On/Off Switch Replacement, Removing batteries: passo 2, immagine 1 di 1
    • Remove the 3 AAA batteries from the device.

  3. Justin Bieber Concert Microphone On/Off Switch Replacement, Removing back half of device: passo 3, immagine 1 di 2 Justin Bieber Concert Microphone On/Off Switch Replacement, Removing back half of device: passo 3, immagine 2 di 2
    • Unscrew the other 4, #8 11.6 mm Phillips Head screws to remove the entire back half of the device.

    • Pull apart the device once screws are loose, splitting the device in half.

  4. Justin Bieber Concert Microphone On/Off Switch Replacement, Positioning device: passo 4, immagine 1 di 1
    • Keeping all wires connected to their attachments, place the front half of the device face down.

  5. Justin Bieber Concert Microphone On/Off Switch Replacement, Removing PCB: passo 5, immagine 1 di 2 Justin Bieber Concert Microphone On/Off Switch Replacement, Removing PCB: passo 5, immagine 2 di 2
    • Remove the 2, #8 11.7 mm Phillips Head screws as well as the 2, #8 7.5 mm screws on the printed circuit board.

  6. Justin Bieber Concert Microphone On/Off Switch Replacement, Removing on/off switch: passo 6, immagine 1 di 2 Justin Bieber Concert Microphone On/Off Switch Replacement, Removing on/off switch: passo 6, immagine 2 di 2
    • Remove the 2, #8 11.7 mm Phillips Head screws on the On/Off Switch Board

  7. Justin Bieber Concert Microphone On/Off Switch Replacement, Replacing on/off switch: passo 7, immagine 1 di 2 Justin Bieber Concert Microphone On/Off Switch Replacement, Replacing on/off switch: passo 7, immagine 2 di 2
    • Remove On/Off Switch Board from its holding and detach the wires.

    • Replace the On/Off Switch Board with a new one and reattach the wires using this soldering guide

Conclusione

To reassemble your device, follow these instructions in reverse order.

Mike Seyman

Membro da: 10/19/14

437 Reputazione

4 Guide realizzate

Team

Baylor, Team 4-1, Williams Fall 2014 Membro di Baylor, Team 4-1, Williams Fall 2014

BU-WILLIAMS-F14S4G1

3 Membri

4 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 153