Introduzione

This guide will aid the user in the installation of the viewer for this device. The viewer is eyepiece that the user looks through in order to take a photograph. This guide will need to be used if the viewer is scratched or cracked. Be sure to put the viewer in the correct way when putting the new part in.

Parti

Flip the device so that the bottom is facing upwards. Using thumb, push the tab on the bottom in the direction indicated by the arrow and then lift the unhinged part of the tab. Flip the device so that the bottom is facing upwards. Using thumb, push the tab on the bottom in the direction indicated by the arrow and then lift the unhinged part of the tab.
  • Flip the device so that the bottom is facing upwards. Using thumb, push the tab on the bottom in the direction indicated by the arrow and then lift the unhinged part of the tab.

Aggiungi Commento

Tilt device so that batteries slide out.
  • Tilt device so that batteries slide out.

Aggiungi Commento

Kit RAM Mac
Accelera il Mac. Porta la memoria al massimo.
Kit RAM Mac
Metti più memoria nel tuo Mac.
Carefully insert spudger into the seam on the top side of the device and tilt and twist the spudger to open the device.  Work it around the device until the two case halves separate. Before completely separating the two halves, grab the tab on the bottom of the device and pull the two halves of the case away from the hinged part of the tab so as not to break the plastic rods. When separating the two halves of the case, be careful not to disconnect the various wires attached to the motherboard and the battery case.
  • Carefully insert spudger into the seam on the top side of the device and tilt and twist the spudger to open the device. Work it around the device until the two case halves separate.

  • Before completely separating the two halves, grab the tab on the bottom of the device and pull the two halves of the case away from the hinged part of the tab so as not to break the plastic rods.

  • When separating the two halves of the case, be careful not to disconnect the various wires attached to the motherboard and the battery case.

Aggiungi Commento

Pull the viewer free from the left hand side of the case. Pull the viewer free from the left hand side of the case. Pull the viewer free from the left hand side of the case.
  • Pull the viewer free from the left hand side of the case.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Katelyn Fry

Membro da: 11/03/2013

1 Reputazione

7 Guide realizzate

Team

Clemson, Team 12-3, Benson Spring 2013 Membro di Clemson, Team 12-3, Benson Spring 2013

CLEM-BENSON-S13S12G3

3 Membri

7 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 171