Introduzione

This guide shows you how to remove the bottom plate, this provides access to the subwoofer itself.

Locate the 3 risers the hold the base plate in place
  • Locate the 3 risers the hold the base plate in place

Aggiungi Commento

Insert a strong spudger or flathead near the riser and gently pry until the plug starts to come out. Work your way around to loosening  each one.
  • Insert a strong spudger or flathead near the riser and gently pry until the plug starts to come out. Work your way around to loosening each one.

Aggiungi Commento

With all three loosened remove the base!
  • With all three loosened remove the base!

  • Note the not equilateral placement of the risers when replacing the base.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 7 persone hanno completato questa guida.

Ryan McLeod

Membro da: 22/05/2010

355 Reputazione

2 Guide realizzate

Thanks, so nice tip. I'll see if I can find a similar speaker, big hug.

durval - Replica

No problem!!

Ryan McLeod -

My speaker is broken like on the image above and it sounds horrible. Do you know where to buy similar speaker in order to replice it?

pszopa - Replica

Does anybody know, if I can get a replacement speaker for the subwoofer of the JBL 2.1. system? Thanks!

Lars -

I was unable to find a replacement for the Atlas subwoofer it uses and ended up "recycling" the whole thing :( I've since replaced it with the the Klipsch ProMedia 2.1s and love them.

Ryan McLeod -

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 3

Ultimi 7 Giorni: 17

Ultimi 30 Giorni: 114

Tutti i Tempi: 5,048