Aggiusta la tua roba Comunità Store

JBL Flip Battery Replacement

Cosa ti serve

  1. JBL Flip Battery Replacement, JBL Flip disassembly: passo 1, immagine 1 di 3 JBL Flip Battery Replacement, JBL Flip disassembly: passo 1, immagine 2 di 3 JBL Flip Battery Replacement, JBL Flip disassembly: passo 1, immagine 3 di 3

    • On the end with the buttons, remove the end cap using the flat head screwdriver to get between the rubber lining and the plastic.

    • After the cap is removed, unscrew the two 3.3mm screws using a size 1 ph screw driver.

    Traduci

  2. JBL Flip Battery Replacement: passo 2, immagine 1 di 3 JBL Flip Battery Replacement: passo 2, immagine 2 di 3 JBL Flip Battery Replacement: passo 2, immagine 3 di 3

    • Unscrew four 3.3mm screws on each end of the JBL using a size 1 ph screw driver (8 screws total).

    Traduci

  3. JBL Flip Battery Replacement: passo 3, immagine 1 di 3 JBL Flip Battery Replacement: passo 3, immagine 2 di 3 JBL Flip Battery Replacement: passo 3, immagine 3 di 3

    • Remove outermost white casing by gently lifting up on one side.

    • Remove two 5mm screws holding the silver back plate in place with a size 2 ph screw driver.

    • Gently lift up and remove the silver casing.

    Traduci

  4. JBL Flip Battery Replacement: passo 4, immagine 1 di 1

    • Remove last white back plate to expose the back of the speaker cover.

    Traduci

  6. JBL Flip Battery Replacement: passo 5, immagine 1 di 3 JBL Flip Battery Replacement: passo 5, immagine 2 di 3 JBL Flip Battery Replacement: passo 5, immagine 3 di 3

    • Pry the four tabs on each side of the speaker cover (8 tabs total).

    • Pry the two tabs on each end to remove the cover (4 tabs total).

    • Slide speaker out of metal speaker cover.

    Traduci

  7. JBL Flip Battery Replacement: passo 6, immagine 1 di 3 JBL Flip Battery Replacement: passo 6, immagine 2 di 3 JBL Flip Battery Replacement: passo 6, immagine 3 di 3

    • Remove 5mm screw in the middle of the back of the device with a size 2 ph screw driver.

    • Unscrew the two 5mm screws on each side using a size 2 ph screwdriver.

    • Open the speaker.

    Traduci

  8. JBL Flip Battery Replacement, Battery: passo 7, immagine 1 di 2 JBL Flip Battery Replacement, Battery: passo 7, immagine 2 di 2

    • Slowly peel the motherboard away from the black glue on the underside.

    • Make sure the battery below the motherboard is turned off before proceeding.

    Traduci

  9. JBL Flip Battery Replacement: passo 8, immagine 1 di 2 JBL Flip Battery Replacement: passo 8, immagine 2 di 2

    • Push brown tab up and gently pull connector out.

    Traduci

  10. JBL Flip Battery Replacement: passo 9, immagine 1 di 3 JBL Flip Battery Replacement: passo 9, immagine 2 di 3 JBL Flip Battery Replacement: passo 9, immagine 3 di 3

    • Remove the first two connectors on the underside of the motherboard.

    Traduci

  11. JBL Flip Battery Replacement: passo 10, immagine 1 di 3 JBL Flip Battery Replacement: passo 10, immagine 2 di 3 JBL Flip Battery Replacement: passo 10, immagine 3 di 3

    • Remove last connector.

    • Remove battery and replace.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 24 persone hanno completato questa guida.

Autore

con 3 altri collaboratori

Dillon

Membro da: 03/11/15

1.556 Reputazione

5 Guide realizzate

Distintivi: 10

+7 altri distintivi

Team

Colorado Springs, Team 9-5, Panko Spring 2015 Membro di Colorado Springs, Team 9-5, Panko Spring 2015

UCCS-PANKO-S15S9G5

3 Membri

5 Guide realizzate

52 Commenti

Excellent tutorial. Very detailed and helpful pictures.

Do you know what the part number and where it can be purchased?

Thanks!

Li V Xi - Replica

I also want to know about the battery specs

ravimohansairam Krishna - Replica

https://www.youtube.com/watch?v=apF4qT3e...

Follow this video tutorial. this will help you definitely

danish -

Mine is not working anymore and I suspect that the battery is not charging. I´ve checked the battery and its code is AEC653055-2Pwith rating 3,7V 2000 mAh. It has 3 cables: red, yellow and black. I´ve used a voltage meetering to check if there some charge coming from and it had 4,0 VDC. So, probably the problem related to my device is with the battery, because it´s not charging. Anyone else had this same issue?

Marcio Michel - Replica

hey. i had the same problem with the battery of JBL flip. and i fixed it. Complete video tutorial is here :)

https://www.youtube.com/watch?v=apF4qT3e...

danish -

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 3

Ultimi 7 Giorni: 22

Ultimi 30 Giorni: 53

Tutti i Tempi: 102,489