Parti

Nessuna parte richiesta.

Push in the plastic tab that can be seen through cracks in the front left corner using a spudger. Push in the plastic tab that can be seen through cracks in the front left corner using a spudger.
  • Push in the plastic tab that can be seen through cracks in the front left corner using a spudger.

Aggiungi Commento

Move down the same side and push in the plastic tab.
  • Move down the same side and push in the plastic tab.

Aggiungi Commento

Kit RAM Mac
Accelera il Mac. Porta la memoria al massimo.
Kit RAM Mac
Metti più memoria nel tuo Mac.
Move to the front right side and once again push in the plastic tab.
  • Move to the front right side and once again push in the plastic tab.

  • There is not a fourth tab to push in after this one.

Aggiungi Commento

Grab the cover by the front side and pull upwards. You might encounter some resistance. Pull firmly, but don't yank it.
  • Grab the cover by the front side and pull upwards.

    • You might encounter some resistance. Pull firmly, but don't yank it.

Aggiungi Commento

Tilt the front case down until the pegs detach from the bottom of the case. Lift up and outward.
  • Tilt the front case down until the pegs detach from the bottom of the case.

  • Lift up and outward.

  • The motherboard will be loose at this point.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Chris Rudolph

Membro da: 05/10/2010

46 Reputazione

1 Guida realizzata

Team

Cal Poly, Team 7-53, Amido Fall 2010 Membro di Cal Poly, Team 7-53, Amido Fall 2010

CPSU-AMIDO-F10S7G53

4 Membri

3 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 13

Tutti i Tempi: 2,929