Aggiusta la tua roba Comunità Store

Inter-tel IP 8660 LCD Screen Replacement

Introduzione

This guide details the steps to taking off the LCD screen of your Inter-tel IP 8660.

Cosa ti serve

  1. Inter-tel IP 8660 LCD Screen Replacement, Rear Cover: passo 1, immagine 1 di 1

    • Before disassembling the phone, make sure it is not plugged into power and the handset phone cord is disconnected from the handset jack.

    Traduci

  2. Inter-tel IP 8660 LCD Screen Replacement: passo 2, immagine 1 di 3 Inter-tel IP 8660 LCD Screen Replacement: passo 2, immagine 2 di 3 Inter-tel IP 8660 LCD Screen Replacement: passo 2, immagine 3 di 3

    • Unscrew the 9 highlighted screws using a #1 Phillips head screwdriver. You can use a magnetized screwdriver to draw them out.

    • 8 mm long

    • 11 mm long

    Traduci

  3. Inter-tel IP 8660 LCD Screen Replacement: passo 3, immagine 1 di 1

    • Lift up the back cover and set it aside.

    Traduci

  4. Inter-tel IP 8660 LCD Screen Replacement, Internal speaker: passo 4, immagine 1 di 1

    • While holding down the motherboard, gently pull the wire harness connecting the speaker to the motherboard until it comes free.

    Traduci

  6. Inter-tel IP 8660 LCD Screen Replacement: passo 5, immagine 1 di 1

    • Lift up the speaker.

    Traduci

  7. Inter-tel IP 8660 LCD Screen Replacement, LCD Screen: passo 6, immagine 1 di 3 Inter-tel IP 8660 LCD Screen Replacement, LCD Screen: passo 6, immagine 2 di 3 Inter-tel IP 8660 LCD Screen Replacement, LCD Screen: passo 6, immagine 3 di 3

    • Lift up the motherboard out of its housing in the front cover of the phone.

    • Set the front cover and button pads aside.

    Traduci

  8. Inter-tel IP 8660 LCD Screen Replacement: passo 7, immagine 1 di 3 Inter-tel IP 8660 LCD Screen Replacement: passo 7, immagine 2 di 3 Inter-tel IP 8660 LCD Screen Replacement: passo 7, immagine 3 di 3

    • Using tweezers, pinch the highlighted connective clips together and depress. Start with the clips in the middle of the motherboard first.

    • Note: There are four clips, one at each corner of the LCD screen.

    Traduci

  9. Inter-tel IP 8660 LCD Screen Replacement: passo 8, immagine 1 di 1

    • Flip the motherboard over so that the LCD screen is facing upward.

    Traduci

  10. Inter-tel IP 8660 LCD Screen Replacement: passo 9, immagine 1 di 2 Inter-tel IP 8660 LCD Screen Replacement: passo 9, immagine 2 di 2

    • Push the black clip holding the ribbon cable out of its casing using the plastic opening tool.

    • This is done using the spudger to lift one side out of its housing.

    • Reposition the spudger to the other side of the black clip and push it flush with the other end.

    • Note: The black clip pushes out of the housing and does not come completely loose.

    Traduci

  11. Inter-tel IP 8660 LCD Screen Replacement: passo 10, immagine 1 di 3 Inter-tel IP 8660 LCD Screen Replacement: passo 10, immagine 2 di 3 Inter-tel IP 8660 LCD Screen Replacement: passo 10, immagine 3 di 3

    • Pull gently on the ribbon cable so that it comes loose from the black clip.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Autore

con 5 altri collaboratori

Juan David GutierrezFranco

Membro da: 01/20/12

67 Reputazione

4 Guide realizzate

Distintivi: 7

+4 altri distintivi

Team

Cal Poly, Team 11-24, Maness Winter 2012 Membro di Cal Poly, Team 11-24, Maness Winter 2012

CPSU-MANESS-W12S11G24

4 Membri

14 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 3

Tutti i Tempi: 836