Salta al contenuto principale

Inter-tel IP 8660 Button Pad Replacement

Cosa ti serve

  1. Inter-tel IP 8660 Button Pad Replacement, Rear Cover: passo 1, immagine 1 di 1
    • Before disassembling the phone, make sure it is not plugged into power and the handset phone cord is disconnected from the handset jack.

  2. Inter-tel IP 8660 Button Pad Replacement: passo 2, immagine 1 di 3 Inter-tel IP 8660 Button Pad Replacement: passo 2, immagine 2 di 3 Inter-tel IP 8660 Button Pad Replacement: passo 2, immagine 3 di 3
    • Unscrew the 9 highlighted screws using a #1 Phillips head screwdriver. You can use a magnetized screwdriver to draw them out.

    • 8 mm long

    • 11 mm long

  3. Inter-tel IP 8660 Button Pad Replacement: passo 3, immagine 1 di 1
    • Lift up the back cover and set it aside.

  4. Inter-tel IP 8660 Button Pad Replacement, Internal speaker: passo 4, immagine 1 di 1
    • While holding down the motherboard, gently pull the wire harness connecting the speaker to the motherboard until it comes free.

  5. Inter-tel IP 8660 Button Pad Replacement: passo 5, immagine 1 di 1
    • Lift up the speaker.

  6. Inter-tel IP 8660 Button Pad Replacement, Button Pad: passo 6, immagine 1 di 1
    • Lift up the motherboard and set aside

  7. Inter-tel IP 8660 Button Pad Replacement: passo 7, immagine 1 di 1
    • Peel off all rubber button covers.

  8. Inter-tel IP 8660 Button Pad Replacement: passo 8, immagine 1 di 1
    • Remove all plastic buttons. (Note: Look at the initial picture for locations of each button set)

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Team

Cal Poly, Team 11-24, Maness Winter 2012 Membro di Cal Poly, Team 11-24, Maness Winter 2012

CPSU-MANESS-W12S11G24

4 Membri

14 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 761