Salta al contenuto principale

Sostituzione RAM Mac mini versione metà 2011

Cosa ti serve

  1. Sostituzione RAM Mac mini versione metà 2011, Copertura Superiore: passo 1, immagine 1 di 2 Sostituzione RAM Mac mini versione metà 2011, Copertura Superiore: passo 1, immagine 2 di 2
    • Posizionare i pollici negli incavi nel coperchio inferiore.

    • Ruotare il coperchio inferiore in senso antiorario finché il puntino bianco dipinto su di esso non è allineato con il cerchio in rilievo sul case esterno.

    • Non è necessario esercitare particolare forza verso il basso durante la rotazione.

  2. Sostituzione RAM Mac mini versione metà 2011: passo 2, immagine 1 di 1
    • Inclinare il Mac mini abbastanza da sganciare il coperchio inferiore dal case esterno.

    • Rimuovere il coperchio inferiore e conservarlo altrove.

  3. Sostituzione RAM Mac mini versione metà 2011, RAM: passo 3, immagine 1 di 2 Sostituzione RAM Mac mini versione metà 2011, RAM: passo 3, immagine 2 di 2
    • Sganciare le linguette sui lati del chip di memoria RAM, premendole contemporaneamente in senso opposto al chip stesso.

    • Queste linguette bloccano il chip in posizione. Sganciandole, il chip "salterà" fuori.

    • Dopo aver sganciato il chip di memoria RAM, estrarlo dal relativo connettore.

    • Ripetere la procedura in presenza di un secondo chip di memoria RAM.

Conclusione

Per rimontare il dispositivo, seguire queste istruzioni in ordine inverso.

Altre 111 persone hanno completato questa guida.

Un ringraziamento speciale a questi traduttori:

en it

100%

Questi traduttori ci stanno aiutando ad aggiustare il mondo! Vuoi partecipare?
Inizia a tradurre ›

13 Commenti

Here is an important trick: Apply no downward pressure while turning the cover. Pressing down will make it harder to turn.

I found this out when searching the web for why I couldn't open the bottom cover.

Lionel Hummel - Replica

I have just fitted the two 8 GB rams but despite refitting several times my computer is only reading one card. It simply says 8 GB memory and one space available. The cards slotted tightly and clicked in position. I have tried exerting a little pressure on the cards to see if there was not good contact but they appear connected. Any ideas please?

Graham - Replica

I had difficulty, only one card is read, the computer says i slot available. Have fitted several times and exerted pressure to ensure contact but still only one card read. Any ideas please?

Graham - Replica

You should try to find out if the DIMM or the slot is broken: I suppose you tried to switch the DIMMs? The easiest way is to try only one DIMM (memory module), first in the lower slot, then in the upper slot.

IMPORTANT: reset the PRAM after altering the configuration, i.e. after moving a DIMM to another slot. (Hold Cmd+Opt+P+R when turning on the Mac and keep holding the keys until you've heared the start chime two times.)

https://support.apple.com/en-us/HT204063

If the one DIMM works in both slots, the slots are okay. Now try the other DIMM. If the second DIMM also works in both slots, I frankly have no other idea than to try a different version of OS X to rule out the possibility of a software problem.

muttztfz -

Removing the cover from the case: come on, people! Use force, but use it gently! There is no way to break things if you turn it into the direction of the second dot (to the left, counterclockwise). If you have to use force, don't push down towards the case, but use this force towards the intended cover rotation – you obviously have to push down also for the grip, but other than that: turn, baby, turn!

muttztfz - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 4

Ultimi 7 Giorni: 18

Ultimi 30 Giorni: 79

Tutti i Tempi: 73,554