Introduzione

Follow this guide to remove the access door of an India Mark II for repair or replacement.

Before performing any repairs, perform a water test on the pump by raising and lowering the handle a full 40 strokes. A properly performing pump will yield greater than 10 liters. Remove the hex head bolt from the top of the access door on the pump head.
  • Before performing any repairs, perform a water test on the pump by raising and lowering the handle a full 40 strokes. A properly performing pump will yield greater than 10 liters.

  • Remove the hex head bolt from the top of the access door on the pump head.

  • On reassembly, this bolt should be hand-tight.

Aggiungi Commento

Pull the access door straight up off the pump head. Store the access door in a sanitary place to prevent contamination. Store the access door in a sanitary place to prevent contamination.
  • Pull the access door straight up off the pump head.

  • Store the access door in a sanitary place to prevent contamination.

Aggiungi Commento

The access door has a tongue that fits into the base of the pump head. The access door makes a convenient tray to hold nuts and bolts during the disassembly.
  • The access door has a tongue that fits into the base of the pump head.

  • The access door makes a convenient tray to hold nuts and bolts during the disassembly.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Andrew Optimus Goldberg

Membro da: 17/10/2009

368.939 Reputazione

1.264 Guide realizzate

Team

iFixit Membro di iFixit

Community

116 Membri

5.778 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 3

Tutti i Tempi: 249