Aggiusta la tua roba Comunità Store

Imation Superdisk USB Drive Daughter Board Replacement

Introduzione

This guide is to help you step by step on how to replace the daughter board to the Imation Supserdisk USB drive.

Cosa ti serve

  1. Imation Superdisk USB Drive Daughter Board Replacement, Plastic Housing: passo 1, immagine 1 di 2 Imation Superdisk USB Drive Daughter Board Replacement, Plastic Housing: passo 1, immagine 2 di 2

    • Flip the device over so the bottom is facing up.

    • You will know it is the bottom because there will be six silver screws visible.

    Traduci

  2. Imation Superdisk USB Drive Daughter Board Replacement: passo 2, immagine 1 di 2 Imation Superdisk USB Drive Daughter Board Replacement: passo 2, immagine 2 di 2

    • Remove the USB converter device by gently pulling it out.

    • Do not pull the converter device out by the cord.

    Traduci

  3. Imation Superdisk USB Drive Daughter Board Replacement: passo 3, immagine 1 di 2 Imation Superdisk USB Drive Daughter Board Replacement: passo 3, immagine 2 di 2

    • Remove the six silver screws using a small Phillips head screwdriver.

    Traduci

  4. Imation Superdisk USB Drive Daughter Board Replacement: passo 4, immagine 1 di 2 Imation Superdisk USB Drive Daughter Board Replacement: passo 4, immagine 2 di 2

    • Slide the bottom plastic panel of the shell down so it is free of the end cap and the top panel.

    • Lift panel free of device.

    Traduci

  6. Imation Superdisk USB Drive Daughter Board Replacement: passo 5, immagine 1 di 2 Imation Superdisk USB Drive Daughter Board Replacement: passo 5, immagine 2 di 2

    • Remove the plastic end cap by sliding it forward, freeing from the rest of the device.

    • You can identify the end cap by noting the label "SuperDisk Drive" above where you would insert a floppy disk.

    Traduci

  7. Imation Superdisk USB Drive Daughter Board Replacement: passo 6, immagine 1 di 2 Imation Superdisk USB Drive Daughter Board Replacement: passo 6, immagine 2 di 2

    • Slide the metal housing out of the plastic shell.

    Traduci

  8. Imation Superdisk USB Drive Daughter Board Replacement, Metal Casing: passo 7, immagine 1 di 2 Imation Superdisk USB Drive Daughter Board Replacement, Metal Casing: passo 7, immagine 2 di 2

    • Slide metal panel out of the metal casing.

    Traduci

  9. Imation Superdisk USB Drive Daughter Board Replacement: passo 8, immagine 1 di 2 Imation Superdisk USB Drive Daughter Board Replacement: passo 8, immagine 2 di 2

    • Slide disk drive out of metal casing.

    Traduci

  10. Imation Superdisk USB Drive Daughter Board Replacement, Daughter Board: passo 9, immagine 1 di 1

    • Flip the disk drive over so the the plug on the daughter board is visible.

    Traduci

  11. Imation Superdisk USB Drive Daughter Board Replacement: passo 10, immagine 1 di 2 Imation Superdisk USB Drive Daughter Board Replacement: passo 10, immagine 2 di 2

    • Using an iPod opener put pressure on the white plug and pull backwards until the daughter board unplugs from the main unit.

    Traduci

  12. Imation Superdisk USB Drive Daughter Board Replacement: passo 11, immagine 1 di 2 Imation Superdisk USB Drive Daughter Board Replacement: passo 11, immagine 2 di 2

    • Gently pull on the daughter board until it separates from the device.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Autore

con 6 altri collaboratori

Darlena

Membro da: 02/11/14

219 Reputazione

3 Guide realizzate

Distintivi: 9

+6 altri distintivi

Team

Ohio State, Team 1-2, Buehl Spring 2014 Membro di Ohio State, Team 1-2, Buehl Spring 2014

OSU-BUEHL-S14S1G2

4 Membri

14 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 17

Tutti i Tempi: 935