Introduzione

Instructions to take out built in speakers inside the laptop.

Parti

Nessuna parte richiesta.

Unscrew the 20 Phillips screws on the underside of the T42.
  • Unscrew the 20 Phillips screws on the underside of the T42.

    • For ease of reassembly, keep your screws organized.

Aggiungi Commento

Unscrew the 2 Phillips screws on both sides of the T42's rear.
  • Unscrew the 2 Phillips screws on both sides of the T42's rear.

leave these four screws alone. No need to remove them.

fredwb - Replica

Of course you need to remove them you Dingbat! They are the main anchors of the screen hinges, Doh!

wbcam -

There are tiny numbers showing the lengths of the screws. 1-2-3-4 where 1 is the shortest.

The dark red circles are not very easy to see. How about white ones?

mattikaki - Replica

Flip the laptop over and open the screen.
  • Flip the laptop over and open the screen.

    • The bezel and keyboard will be loose, be careful.

Aggiungi Commento

Carefully maneuver the palm rest away from the keyboard, as both the keyboard and palm rest/trackpad will come off together. Remember, both the keyboard and trackpad have connectors to the motherboard. Disconnect these before completely removing either component.
  • Carefully maneuver the palm rest away from the keyboard, as both the keyboard and palm rest/trackpad will come off together.

    • Remember, both the keyboard and trackpad have connectors to the motherboard. Disconnect these before completely removing either component.

Aggiungi Commento

The metal bracket will now be free to move, grasp it and remove it from the device. The metal bracket will now be free to move, grasp it and remove it from the device.
  • The metal bracket will now be free to move, grasp it and remove it from the device.

Aggiungi Commento

Remove the small rubber piece that is covering the T42's microphone,
  • Remove the small rubber piece that is covering the T42's microphone,

Aggiungi Commento

This component is free to move.
  • This component is free to move.

Aggiungi Commento

Disconnect its connector and pull it out carefully.
  • Disconnect its connector and pull it out carefully.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Gerald Watanabe

Membro da: 14/04/2010

180 Reputazione

14 Guide realizzate

Team

Cal Poly, Team 29-76, Johann Spring 2010 Membro di Cal Poly, Team 29-76, Johann Spring 2010

CPSU-JOHANN-S10S29G76

4 Membri

30 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 4

Tutti i Tempi: 4,896