Parti

Nessuna parte richiesta.

Remove the screws shown. These screws are connected to the keyboard.
  • Remove the screws shown. These screws are connected to the keyboard.

Aggiungi Commento

Take the spudger tool,  go around the edges of the oranges boxes shown, and pop off those two sections. Then, go around the edges of the keyboard, and it should slide off.
  • Take the spudger tool, go around the edges of the oranges boxes shown, and pop off those two sections. Then, go around the edges of the keyboard, and it should slide off.

Aggiungi Commento

Lift and move keyboard aside to get to screws. Try not to remove the attached ribbon. Remove the screws shown. These screws will allow you to loosen the fan. Be careful since there is still another part connected.
  • Lift and move keyboard aside to get to screws. Try not to remove the attached ribbon.

  • Remove the screws shown. These screws will allow you to loosen the fan. Be careful since there is still another part connected.

Aggiungi Commento

Carefully unplug the highlighted part, and your fan should come straight out.
  • Carefully unplug the highlighted part, and your fan should come straight out.

Aggiungi Commento

The section in blue is where your new fan will go.
  • The section in blue is where your new fan will go.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 5 persone hanno completato questa guida.

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 8

Ultimi 30 Giorni: 18

Tutti i Tempi: 1,565